Topic: 14 hp vanguard v-twin question

[LEWY]

I am just getting into this crazy sport and am looking for some help. I am buliding a 14 v-twin motor and
was told that the valve begin to float at around 4000-4200 rpm. I am only running stock with govern still on right now but want to step up engine performance. I am tryin to find a hig rev kit and a cam that is
suppose to allow me to run up to 6000 rpms. Looking for any feed back and if possibly website that I
can purchase the rev kit and cam. Thanks for any help on this matter.

[TheMowinCuban]

www.arcracing.com

[LEWY]

Thanks for adress, I tried calling them and they told me that they do not carry the high rev kits. they recomended to find a gentleman named Al Hodge to get a kit so I will try that. Does any one have a suggestion on size of cam to run with for the most part a stock engine. thanks again for any feed back.

[Roger S]

Find George Herrin's user name at this web site and get his info and contact him. You'll be much better off with his parts sources and recommendations, I sure was. You may want a set of the longer ARC rods anyway if you're revving that high and they allow you a free compression increase via piston height.

[MTDrider1160]

Try Don at G-Team, I had a bunch of questions and he cleared them right up for me.  www.g-team.us

[mowcephus]

Definitely get with George Herrin.  He'll steer you in the right direction!

[rebelchild16]

George and them at E C dist has what you need in stock .From a cam shaft to value springs ECT!!!!!! He'll be glad to give you some pointers on the vanny!!!!

[George Herrin]

Well there is so much you can do to a vanny. They are sweet little motors. Lewy give me a call Monday, 615-446-6807, I can set you up with everything you need inside and out on that motor.