Author Topic: ec two barrel  (Read 5539 times)

0 Members and 1 Guest are viewing this topic.

Offline Big Mike

  • Mow-Forum Junkie
  • ***
  • Posts: 1055
  • Karma: 3
  • Gender: Male
    • View Profile
ec two barrel
« on: November 08, 2015, 09:32:24 pm »
Anyone know the stock jet size that comes in the ec two barrel im running a bit lean & want to bring it up but dont know were i stand on jet side from E.C. also were are these jets located other carbs have the upper tilision jets that are replacable.
2013 ARMA National Points Series Southeast Region 3rd place Super Stock
2015 FXT Champion Local

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: ec two barrel
« Reply #1 on: November 09, 2015, 06:08:42 am »
ec sells a jet kit for them
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

Offline Big Mike

  • Mow-Forum Junkie
  • ***
  • Posts: 1055
  • Karma: 3
  • Gender: Male
    • View Profile
Re: ec two barrel
« Reply #2 on: November 09, 2015, 10:18:21 pm »
ec sells a jet kit for them


i understand that George but there is no say what size jets come in the carb from e.c
2013 ARMA National Points Series Southeast Region 3rd place Super Stock
2015 FXT Champion Local

Offline chavez

  • Turf Warrior
  • **
  • Posts: 186
  • Karma: 0
  • Gender: Male
    • View Profile
Re: ec two barrel
« Reply #3 on: November 09, 2015, 11:40:58 pm »
That's where measurement tools come into play.  Figure out where you are then either drill bigger or order bigger.  Remember, only you can prevent forest fires.  Much the same, only you can tell us what you have.
Travis Callaway

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: ec two barrel
« Reply #4 on: November 10, 2015, 07:01:58 am »
 bought for intek 40's vanny 42's
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

Offline Big Mike

  • Mow-Forum Junkie
  • ***
  • Posts: 1055
  • Karma: 3
  • Gender: Male
    • View Profile
Re: ec two barrel
« Reply #5 on: November 14, 2015, 12:19:22 pm »
bought for intek 40's vanny 42's

intek 44
2013 ARMA National Points Series Southeast Region 3rd place Super Stock
2015 FXT Champion Local

Offline PJG56

  • Turf Warrior
  • **
  • Posts: 580
  • Karma: 4
  • Gender: Male
    • View Profile
Re: ec two barrel
« Reply #6 on: November 15, 2015, 04:19:44 am »
bought for intek 40's vanny 42's

What George meant was if carb was bought for Intek it has size 40 jets,if bought for Vanny it has size 42 jets
Paul Guptill  (oppy) #238modX
2012 slmra mowstock champion(builder/owner)

2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)

Offline Big Mike

  • Mow-Forum Junkie
  • ***
  • Posts: 1055
  • Karma: 3
  • Gender: Male
    • View Profile
Re: ec two barrel
« Reply #7 on: November 19, 2015, 10:30:55 pm »
does the carb have any adjustments like air needles or idle mixture. what is the screw in the bottom of the bowl a drain?
2013 ARMA National Points Series Southeast Region 3rd place Super Stock
2015 FXT Champion Local

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: ec two barrel
« Reply #8 on: November 20, 2015, 01:12:57 pm »
Yes a drain there are two low circuit air adjustments on top.
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

Offline Big Mike

  • Mow-Forum Junkie
  • ***
  • Posts: 1055
  • Karma: 3
  • Gender: Male
    • View Profile
Re: ec two barrel
« Reply #9 on: November 21, 2015, 06:24:28 pm »
george do you have the jet kit part number?
2013 ARMA National Points Series Southeast Region 3rd place Super Stock
2015 FXT Champion Local

Offline George Herrin

  • aka SUPERMAN
  • Superman
  • Highly Mowtivated
  • *
  • Posts: 17732
  • Karma: 102
  • Gender: Male
  • I am going to Race Every Race like its my last one
    • View Profile
    • BTMRA Home/Forum An Independant Club.
Re: ec two barrel
« Reply #10 on: November 22, 2015, 11:56:19 am »
i dont you will have to call n ask
George Herrin #6
Indian Power.. You gotta Go big to beat em or Go HOME
8 time ARMA National Champion
4 time USLMRA National Champion
Retired from BP
www.herrinmowersports.yolasite.com
www.allamericanmowerchampionships.yolasite.com
My other racer is a 1/5th scale Dirt Late Model!!!!

Offline Kiwi

  • Newbie
  • *
  • Posts: 22
  • Karma: 0
  • Gender: Male
    • View Profile
    • firststoneracing.com
Re: ec two barrel
« Reply #11 on: November 24, 2015, 10:20:14 pm »
Hi Gents

I'm also running this carby (the two barrel Ruixing on my 16Hp vanny) and I'm wondering what the single spring loaded screw that just above the lower air sensor adjusts?
I'm assuming the two screws on top of the carb (one either side) are idle adjustments?

Any info about adjusting this carby would be appreciated.

Cheers Grant the Kiwi racer
The more I learn the less I know

 

anything