Frame Height: What is the minimum?
1.5 but you dont want it lower than 2"
Can anything be lower than the bottom of the frame?
If so, what
What is the minimum height of those items.
THERE IS NONE SPECIFIED
Are 1"x2" box tube frames that have an EC type axle welded to the front and bearing plates welded on the rear, then covered with a stock mower frame legal?
YES NO DIFFERENT THAN WELDING IT INSIDE OF THE FRAME
Or does the front axle and the bearing plates need to be welded to the stock mower frame and then that frame can be strengthened with the box tubing?
THEY OUT THERE BOTH WAYS
Can frames be narrower than 15"?