Topic: 15x6.00-6 rims

[JareeB]

where could i find rims to make a my tires that are 15x6.00-6? and will they work with this hub?
http://www.mfgsupply.com/m/c/53-681.html

[Squidd]

You can not fit 6" rims on a 4 bolt hub...

[JareeB]

okay so whats  good size rim and tire to get thats not crazy expensive, i already have to ones for the front so im good there just trying to find the 4 bolt rims is hard. im going to be useing this hub
http://www.mfgsupply.com/m/c/53-681.html

[Rooster]

Not sure about that particular hub, but I do have a 6" wheel with a 4 bolt hub on it.
that same out fit has some on there some where?

[JareeB]

Not sure about that particular hub, but I do have a 6" wheel with a 4 bolt hub on it.
that same out fit has some on there some where?

okay what about a different hub that will work with a 1" live axle?

[Rooster]

http://www.mfgsupply.com/m/c/8-379.html

You could use those with that hub you have, but you would need to drill a new bolt circle in it and cut it down some.
I have a hub for a 1" axle with a 2 7/8" bolt circle, but Ido not know where it came from?

[JareeB]

idk if i want spilt rims cuz tubs are a pain

[Burwell555]

you will thank yourself for running tubes later down the road when you get into low tire pressure situations

[JareeB]

alright 

[Westley Milburn #77W]

okay so whats  good size rim and tire to get thats not crazy expensive, i already have to ones for the front so im good there just trying to find the 4 bolt rims is hard. im going to be useing this hub
http://www.mfgsupply.com/m/c/53-681.html

i wouldnt use that hub without beefing them up..they WILL break sooner or later...believe me i know..been there done it

[amr5080]

If you're doing a build, build it safe and strong the first time. You will thank yourself. A good place to get good used parts is www.4cycle.com under their forum. They are kart guys and there is a TON of stuff on there that we can use on mowers.