Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - biker

Pages: [1] 2
1
Briggs OHV & Vanguard / intec single
« on: September 24, 2018, 04:50:10 PM »
I have an 18.5 intec single on a grass cutter. All stock never opened suddenly starts sputtering and stops. Will not turnover unless plug is pulled. Took it apart thinking some kind of compression relief problem. To my amazement the cam timing is 4 teeth of the crank mark. Can't see anything wrong. Any Ideas what caused this to happen?

2
Honda and Clone Engines / offroad mower
« on: February 06, 2018, 05:21:30 PM »
I building an offroad mower thats part MTD part go kart. It has a predator with a tav and the carb has been rejetted has air filter and pipe. Problem is won't idle I'm sure the pilot jet needs to be opened but not sure how. Got some small bits but may not be small enough. Any Ideas??

3
Briggs OHV & Vanguard / 18.5 vanguard
« on: January 27, 2018, 12:17:36 PM »
I have an 18.5 vanguard that will not start. Plenty of spark and gas just will not hit. Spins very easy without plug but
I can stop it with my thumb over plug hole. Does the cam have a compression release stuck or is it something else. Would like to know before I tear into it. :confused: :confused: Thanks

4
Chassis / mini prow
« on: April 02, 2017, 10:12:31 AM »
I am looking at building a mini pro mower. I need all the help I can get. Pictures would be great as would rules. :confused:

5
Chassis / miniprow
« on: January 27, 2017, 06:13:29 PM »
I want to build a mini pro mower but I can't find any pictures, can any one point me in the right direction??

6
Chassis / golf cart wheels
« on: January 27, 2017, 05:58:32 PM »
What do I need to mount golf cart wheels to a 1in go kart axel?  Thanks

7
Coffee Shop / mower class
« on: April 10, 2016, 12:24:51 PM »
I am nearly finished with my mower and Its based on Georges super mod single. It will have a gx 390 like Georges but not as modified right now basically stock. question is what classes can I run with this mower? I've done every thing the right way with axels and wheels and tires on an MTD mower just don't know what class to shoot for with this mower??

8
Coffee Shop / wheel bolt pattern
« on: February 04, 2016, 04:33:41 PM »
I have a chance to get a few golf cart wheels cheap. Question is  the bolt pattern. Is it the same as the 4 bolt pattern used on mowers???

9
Driveline / wheels
« on: February 04, 2016, 09:15:39 AM »
I have a chance to pick up some golf cart wheels on the cheep. Is the bolt pattern the same as the aftermarket wheels people use??

10
Chassis / Steering question
« on: December 09, 2015, 09:44:24 AM »
I have  my mtd type frame tore down and  have started the front axel. Now my question, for direct steering is the angle too straight in the stock position? I don't see how you get enough forward movement to make it turn. I can't seem to find a picture of how it works. Also where can I find an 8 in pulley to fit the 1 in shaft on the motor?
thanks

11
Briggs Flathead / walbro carb
« on: December 03, 2015, 09:33:54 AM »
After working on go carts I'm familiar with this type of carb. Where do I find one big enough for a 28ci Briggs? What type of manifold is used??
Building a mod single.

12
Chassis / front axel
« on: November 24, 2015, 08:59:03 AM »
I'm going to build my own front axel, what I need to know is what do you use for the barrels on the spindles ?
PS Tractor supply is only 5mi away.

13
Briggs Flathead / starter question
« on: November 18, 2015, 08:26:15 AM »
I have a 12.5 Briggs that I want to use to get the bugs out of my first build but I need a starter. I can't seem to find an exact match on the web with the part no's that I have. Other than the plastic gear they all look the same. Is there really any difference? :confused:
Oh, and by the way my part no. is 281707
Oh my part number is 281707

14
Driveline / 700 peerless wont shift
« on: November 16, 2015, 04:14:02 PM »
Just opened my first peerless. Not that bad, now the guy that gave it to me said it would not shift. Said he only had 5th and reverse. other than being full of grease I can see nothing wrong. Any  ideas of what to look for before I tear into it??? :confused: :confused:   

15
Driveline / gear boxes
« on: October 23, 2015, 05:38:11 PM »
I am building my first mower ,its an MTD and I want to hook  to a go cart axel. My question is what mowers have the Peerless gear boxes and what mowers have RAGBs?? I would appreciate this info before I go digging around.

Pages: [1] 2