Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Michaelgc7

Pages: [1] 2
Coffee Shop / Carrier performance
« on: January 02, 2018, 12:19:15 AM »
In attempt to attract more people to heymow I have decided to make a thread specifically for Carrier Performance. We are a lawn mower racing superstore. A one stop shop, . We already post all this stuff on social media but heymow is a greatly neglected now a days. It is a great source of info and needs to be used more. So this is our attempt to help the community and especially the new guys who have questions and need parts. Happy new year to all! 

Briggs OHV & Vanguard / Carrier performance new website!
« on: February 21, 2017, 07:51:53 PM »
After a lot of thinking we have decided to make a website to buy high performance V twin stuff. No one sells stuff to help people build national competitive engines so we decided to offer high Horsepower parts. Here is our new website, browse our parts and tell your friends :) check in often we will constantly be adding new parts to the site.  If the moderators or website owner could add this to the links page that would be great thanks :)

Briggs OHV & Vanguard / New Billet 49 intek pistons
« on: February 21, 2017, 07:47:44 PM »
INTEK 49 PISTONS ARE NOW AVAILABLE! For all those wanting billet intek 49 pistens well here they are, these pistons came out 14 grams lighter than stock and have all the same features that our vanguard pistons have. They are made for a drop in fit with ARC 4.5'' rods.

Coffee Shop / Need a little help for a friend in need
« on: March 07, 2016, 05:32:41 PM »
Hi everyone, i have never posted in coffee shop before but I have a friend who needs as much help as he can get. One of my best friends and fellow lawn mower racer up here in canada recently lost everything he owns in a house fire. It is a situation that none of us would like to be in and i am trying to help him out as much as i can. I am taking donations through a Facebook page for those that feel generous. :) Do not feel obligated to donate, no one has to! I am just trying to help a good friend in need. Thanks in advance for those that will donate :) every little amount helps!

Send a message through this Facebook page and i will send the paypal adress

Briggs OHV & Vanguard / jetting twin mikunis on a 35ci vanny
« on: October 11, 2014, 07:12:54 PM »
Has anyone run twin mikunis on a vanny? If so please post I need a ballpark idea of where to start on jetting, I have two 24mm flat slide mikunis on a 35ci vanguard with a cheetah grind, big valves and stock crank, im not wanting to turn over 7500. I just want to know where to start with the jets thanks :)

Briggs OHV & Vanguard / Vanguard timing
« on: August 31, 2014, 09:43:28 PM »
Just a question but what is the ideal flywheel timing advance on the vanguard twins? and what is the maximum advance before the motor runs rough?

Post your Pics! / A new canadian fxt style mowchine (pro-modified)
« on: July 14, 2014, 08:51:11 PM »
Hi guys, I am currently in the works of building an fxt style machine. Here in quebec its the pro modified class. I will be running an 18hp horizontal vanguard, feel free to guide me towords the right choices for the engine. I am a briggs master service technician and have been building race engines for many years but these engines have been using mostly stock parts, so i am new to a complete outlaw engine. Here is the chassis so far everything is tack welded and nothing finalized, its a spare time project since i am currently deep into my race season :P All comments and advice is welcome! Want to make the best machine possible :) aiming for 250lbs or less and the egine hase to have minimum 30-35 hp

Briggs OHV & Vanguard / shaving stock pistons
« on: June 09, 2014, 09:24:32 PM »
Hi I know I have seen it before but I can't find it, when shaving the pistons for long rods what's a good thickness left between the compression ring and the top of the piston? My compression ring is .045 and I have .055 left to the top of the piston, is this okay?

Briggs OHV & Vanguard / double carburetor intakes
« on: June 04, 2014, 02:30:02 PM »
I see that many people run twin carbs on horizontal vannys and billet intakes, where do you guys get these intakes? i want to find some that will fit the D port of the vanguard head

Briggs OHV & Vanguard / porting
« on: June 02, 2014, 10:06:42 PM »
What would be a really good porting job on a 30-35 vanguard anyone got tricks or tips on what I do or in what direction I head in? If anyone has pictures that would be great! Thanks:)

Briggs OHV & Vanguard / briggs vanguard 18hp rev limiter
« on: March 14, 2014, 10:12:30 AM »
Hi I was wondering if an msd kit exists to limit a vanguard to rev at 6200, does anyone use rev limiters? I do not know much about rev limiters aha thanks :)

Briggs OHV & Vanguard / Cam retarding
« on: December 18, 2013, 06:47:02 AM »
I was wondering since I do not currently have access to a dyno does anyone know how retarding the cam in a 350000 effect the torq curve? does it change it to a higher rpm? Just very curious thanks  :)

Briggs OHV & Vanguard / stock parts vs double valve springs
« on: July 23, 2013, 05:55:48 PM »
Im asking advice from anyone who has this experience.. would stock rockers, push rods and cam from a stock 31ci single resist rocket ron's double valve springs?

Briggs OHV & Vanguard / Intek 31 cube oil overflow
« on: July 10, 2013, 05:31:36 PM »
Any advice would help a lot here since i havent had this probleme yet  :doh: Basically i have a briggs 31 cube without any performance parts but built with old school tricks. So i have not had an intek that had oil overflow out of the breather but this one does a lot. I currently have a catch can connected to a tube that runs to the stock breather. The problem is that my catch can filled up to the point of spewing everywhere during a ten lap race. I was wondering first of all if this is normal since i know many of you do run catch cans, secondly what the best catch can setup would be, thirdly, whether or not i should remove the steel flap in the breather and lastly if i should run a return line back into the block or a ideal location. Thanks in advance  :)

Briggs OHV & Vanguard / G-Team built oppy carb
« on: July 02, 2013, 07:11:17 PM »
This weekend I tried out my mower.. I came to realise that after two laps the engine would run out of fuel and sputter to a stop. I let it sit for thirty seconds and it starts up fine and runs another two laps until it runs out of fuel. My impression is that the inlet of the carb is too small. My current setup is a 31ci single intek that's not built. The carburetor is an oppy carburetor built by G-team that the stock fuel pump has been bypassed for the fuel to enter directly into the bowl. I am currently running a gravity feed system and i know that's not the problem since it worked great this winter with another carb  :doh: , what I was wonder was if the entrance of the carb for the fuel is too small and if so would adding a mikuni vacume pump solve the problem? Anyone already had this problem? Any help would be great I race this weekend..  :)

Pages: [1] 2