Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - amr5080

Pages: [1] 2 3
1
Coffee Shop / Where to get camaro parts?
« on: April 30, 2012, 04:38:23 AM »
I know a lot of you work on cars, and I need some weather stripping for an 81 Camaro. Where is a good place to get this kind of stuff? Thanks

2
Chassis / Front brake question
« on: March 28, 2012, 03:55:06 PM »
When hooking up front brakes with a Mcp master cylinder, do you just run 1 line to each caliper? Or is it more comicated than that?

3
Chassis / Hegar front brake question
« on: January 23, 2012, 07:49:34 PM »
I'm installing my first set of front brakes. They are Hegar and I am using a MCP master cylinder. Do you run a line to each front caliper straight from the master cylinder? If so, do you have to run equal length lines to each caliper? or does it affect pressure if you run different length lines?

4
Coffee Shop / RIP Joe Paterno
« on: January 21, 2012, 08:37:32 PM »
Don't know how far across the country this has reached but the beloved coach from my alma mater Penn State, Joe Paterno, died his evening. Its too bad all of the controversy had to taint his reputation. He will be missed.

5
Chassis / Ec spindles
« on: November 29, 2011, 06:37:02 PM »
Are the ec spindles keyed for front brakes?

6
Briggs OHV & Vanguard / Intek billet rod bolts
« on: November 25, 2011, 04:45:58 PM »
Anyone know which bolts you use for the arc rod? Gonna order some while they're on sale. A part number would be great. Thanks

7
Honda and Clone Engines / Gx390 guys, check this out
« on: October 08, 2011, 05:01:04 AM »
Found this on the 4cycle karting site. Raceseng is having a clearance on 390 parts. http://www.raceseng.com/store/performance/340-390hondaandclone/clearance

8
Coffee Shop / Anyone know a cheap welding supply store online?
« on: March 04, 2011, 03:55:11 PM »
My neighbor is putting together a welding shop and needs a lot of 2/0 ground cable. The guy he's dealing with now told his is it $6 per ft. I found it as low as $2.93, but that doesn't include shipping. Anyone know a good place to get this stuff?

9
Coffee Shop / Anyone making vinyl letters/numbers?
« on: March 02, 2011, 08:12:53 PM »
I'm needing to order some numbers and such and was wondering if any fellow racers are making these. I would like to keep the business with the racers if possible.

10
Chassis / Wheels for front brakes
« on: February 26, 2011, 06:44:55 PM »
What wheels do I need to run with Hegar front brakes? The ones I have now have too much back spacing and the caliper hits.

11
Other Engines / Honda GX390 roller rockers
« on: February 18, 2011, 06:03:03 AM »
Any of the mower parts suppliers sell roller rockers for the gx390? I know there's several kart places out there, but I'd like to keep with the mower guys if anyone carries them. Thanks

12
Chassis / Steering shaft support bearing
« on: February 13, 2011, 07:30:54 PM »
This is a basic question, but my mower didn't come with a steering shaft support when I bought it, so I'm adding it this year. Went to Lowes today with my calipers and could not find pipe with an 1 3/8 ID which is what the bearings that I am using are. What is everyone using to put the bearings in?

13
Driveline / Where to get MCP front brake discs and hubs
« on: December 02, 2010, 06:27:23 PM »
I can't seem to find any place that sell the front discs and hubs for the MCP front brake setup. Can anyone help me out? Thanks

14
Chassis / Is 4 on 4 the same as 4/100
« on: November 26, 2010, 06:38:42 PM »
Is a 4 on 4 pattern wheel, the same as a 4/100 wheel? Thanks

15
Chassis / 10" brake disc
« on: November 25, 2010, 10:17:41 AM »
I tried searching and couldn't find anything. I know Ron's Rocket parts makes a 10" disc that used a sprocket hub. Does anyone else make one that you can use the standard MCP hub with?

Pages: [1] 2 3
anything