Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - donanza

Pages: [1]
1
Mower Engines & Parts / Race ready Vanguard
« on: December 07, 2017, 06:22:42 PM »
38" Vanguard motor
Intek pistons, ARC rods and flywheel. Denso starter
Precision solid cam, ported 38 heads w oversize valves and heavy springs, Manton pushrods
Cromwell carb, w EC air filter and new extra Uno pre filters, new extra set bearings
Bolt in and run, needs nothing. $1500 plus shipping
Also have 2 extra cranks if you buy motor and pay extra shipping, you can have
dwatsonanza@yahoo.com
Can send pics

2
Mowers or Complete Setups / Vanguard Complete motor
« on: December 06, 2017, 07:49:25 AM »
38" Vanguard motor
Intek pistons, ARC rods and flywheel. Denso starter
Precision solid cam, ported 38 heads w oversize valves and heavy springs, Manton pushrods
Cromwell carb, w EC air filter and new extra Uno pre filters, new extra set bearings
Bolt in and run, needs nothing. $1500 plus shipping
Also have 2 extra cranks if you buy motor and pay extra shipping, you can have
dwatsonanza@yahoo.com
Can send pics

3
Coffee Shop / v belts
« on: August 20, 2017, 06:45:48 PM »
Does anyone have the contact info for the guy who sold the red v belts? can't find him on ebay

4
Briggs OHV & Vanguard / Re: Intek 21hp v-twin build questions..
« on: April 01, 2017, 11:57:28 AM »
Precision sells Intek cams

5
Coffee Shop / Re: Temperature
« on: January 06, 2017, 06:00:39 PM »
35* here for a low- worked on the track today

6
Briggs OHV & Vanguard / Re: V-Twin Coil setup with kill switch.
« on: October 18, 2016, 01:17:02 PM »
Brian- Do yourself a favor and buy the briggs part- only about $10 on Ebay

7
Briggs OHV & Vanguard / Re: V-Twin Coil setup with kill switch.
« on: October 16, 2016, 10:28:05 AM »
You need a diode wire between the coils- it isolates the coils and keeps them from cross feeding. briggs part number 844547-692319-.

8
ARMA Races / Re: arma insurance
« on: June 27, 2016, 07:58:19 PM »
Try

Stacey Crowl .
stmowtivator@gmail.com

9
Misc. Racing Items / Re: Digatron tachs
« on: December 17, 2015, 04:44:50 PM »
Ed- Check your messages

10
Briggs OHV & Vanguard / Re: EC Cheetah Cam Identification, from EC
« on: October 27, 2015, 06:45:17 AM »
If the one calling would leave a message with a return phone number the human will return your call.
Not been my experience George

11
Briggs OHV & Vanguard / Re: EC Cheetah Cam Identification, from EC
« on: October 26, 2015, 04:44:49 PM »
Wouldn't it be nice if you could still talk to a live human at EC?

12
Briggs OHV & Vanguard / Re: Intek Block Failure.
« on: September 22, 2015, 06:42:27 PM »
I know a guy who wasted three inteks like this. Finally figured out the motor plate was flexing, or too light, or something of that nature.

13
Coffee Shop / Re: valve cover spacers
« on: September 21, 2015, 11:36:54 AM »
If it was possible to get ahold of him- it would be ok

14
Coffee Shop / valve cover spacers
« on: September 21, 2015, 10:35:57 AM »
Does anyone make a spacer fo Vanguard valve covers?

Pages: [1]
anything