Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mud Machine

Pages: [1] 2 3 ... 6
1
ARMA Races / Re: ARMA Points Race April 29th, Cortland NY
« on: April 25, 2018, 12:59:50 PM »
Races begin at 12 PM.

2
ARMA Races / ARMA Points Race April 29th, Cortland NY
« on: April 10, 2018, 07:43:29 PM »
The first national points race for ARMA is Sunday, April 29th!

It's at Skyline Raceway in Cortland NY. More info on www.racingmower.net

Greatness comes with numbers, lets make the season opener a success!

3
ARMA Races / 2018 Season!
« on: January 18, 2018, 07:21:01 PM »
Who's ready for the 2018 Racing Season to be here?  :woo:

4
Briggs Flathead / Dense Heavy Duty Starters - Part numbers that work?
« on: September 29, 2016, 05:28:52 PM »
Hi everyone, Looking to purchase a Denso starter for my flathead build. I have found multiple starters on Ebay for good prices but am not positive that they will work with the ARC flywheel.

Any help or info is appreciated! A starter I'm looking at has the part number 806448. If this one will work, let me know!

Thanks

5
Newcomers / Re: Any racing in NH?
« on: March 30, 2016, 06:07:48 PM »
The Proving Grounds is a great spot, I will be racing there this year in MXR!

Prove it Mower Racing on Facebook is directly mower racing, but the 4X4 Proving Grounds Facebook page is the whole facility.

Hope to see you there!


6
ARMA Races / Build Clinic - 4X4 Proving Grounds
« on: January 02, 2016, 04:49:49 PM »

When - January 30th @ 1 PM

Where - 4X4 Proving Grounds in Lebanon Maine ( 270 Carl Broggi Hwy, Lebanon ME )

Why - To help people new to the sport build / get involved.

Bring lawn chair!  :)


7
Driveline / Re: 1" Rear Axle Pros/Cons
« on: August 31, 2015, 01:08:33 PM »
Most everyone is going to say go with 1 1/4" axle. I have run the 1" in a BP for 4 seasons with no issues. Many have bent them. I have also bent 1 1/4" axle in my supermod. I wouldn't change unless I tore something up bad. If you needed parts at a race, most will have extra parts for 1 1/4".

Okay Thanks for the Response!

I think Ill stick to a 1" Axle.  :D

8
Driveline / 1" Rear Axle Pros/Cons
« on: August 31, 2015, 09:50:58 AM »
Hey guys, I'm running a 1" axle in my Mod-XR and was wanting some input.

I've competed in two races and everything has been great, no problems.

So I was wondering if I would be okay moving up to a class like SP with the 1" axle?

Thanks-
Nico

Feature Link:

9
Briggs Flathead / Re: best briggs parts for a oppose twin
« on: July 24, 2015, 06:20:18 AM »
It is Factory Experimental Single

Would be interesting to see on the track, but I'm not sure its legal.

10
Coffee Shop / Re: You might be a mower racer if...
« on: July 15, 2015, 09:37:15 AM »
You might be a mower racer if.. Every time you pass a mower on the side of the road you think, "that looks like a stiff chassis.. No rust.."


Sent from my iPhone using Tapatalk

11
Chassis / Re: noob mower build
« on: July 12, 2015, 07:35:20 PM »
Are you looking to use a kart axle? If so BMI karts is cheap and will have what you need. as for your engine.. I'd stick to lawn mower engines, in my opinion its part of what sets a racing lawn mower, apart from a gokart. But if you want easy speed and less modification than a dirt bike or sled engine is good to use, not in an association like ARMA (what I race in) and USLMRA of course but it would work on your course with your buddies.

Best of luck, im here to help if you have questions!

-Nico

12
Kohler Engines / Re: Kohler steel ring gear
« on: June 24, 2015, 02:08:44 PM »
Ill be there Saturday, definitely interested to see how it turns out!

13
Chassis / Re: noob mower build
« on: June 24, 2015, 02:01:03 PM »
Im right in Durham NH, and there really aren't many tracks for dirt in NH but there are a couple in ME and the SLMRA in STrafford NH is the only ice racing around! Good luck with your build, hope you and your friends have fun on your ice course.

14
Kohler Engines / Re: Kohler steel ring gear
« on: June 20, 2015, 07:33:45 PM »
Really smart idea!

15
Briggs Flathead / Re: Intake and after market air filter for oppy
« on: June 20, 2015, 09:15:19 AM »
We're I'm racing at they are allowed

Oh, interesting!

Pages: [1] 2 3 ... 6
anything