Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jim russell

Pages: [1] 2
1
Newcomers / Re: Roll Call Ohio Racers
« on: January 31, 2014, 10:08:58 am »
Hello Jim here. I race us race also with Matt. I am from Columbus area and Matt is in Marion ohio

2
Newcomers / Re: Hello from Bethel, Ohio
« on: January 29, 2014, 07:36:58 am »
Welcome not sure of mowers. Most us are columbus and north and east.

3
Coffee Shop / Re: Looking for tracks
« on: October 09, 2013, 06:35:09 pm »
There is no tracks on the west side. I originally from piqua. We do a race in maris stine. Limestone is a really good place to go to look at machines and see how to build things
Sorry thought you was from the west side of ohio

4
Non-Affiliated Races / Re: Monster mow down in Ohio
« on: July 29, 2013, 08:28:30 pm »
We got some brad will try to get them on tomorrow. It was an awesome time

5
Coffee Shop / Re: Ohio Lawnmower racing around Dayton or Columbus
« on: January 19, 2012, 07:37:58 am »
From dayton it is about 2 hour to any one of the tracks. i am origanlly from troy.

6
And that is why we have a chance and hopes to beat you on the track one day lol. Maybe next year with the nitro meatane briggs and 104 flip flops lol

7
I am going sat. but not sure when. i proubly still beat zach lol

8
Kohler Engines / Re: kohler OHV single cam grind
« on: October 28, 2010, 12:51:53 pm »
Try dyno cam they did my 15 hp comand vert. really nice job to.

9
USLMRA Races / Re: Richwood, Ohio MowOhio LC Race July 24th
« on: July 19, 2010, 04:48:31 pm »
It is north west of columbus. Are planning on being in ohio this weekend.

10
Briggs OHV & Vanguard / Re: BRIGGS OHV CARB
« on: June 23, 2010, 10:07:57 am »
They are a little meesd up on the top. Do you know what the size is on the threads? thx George

11
Briggs OHV & Vanguard / BRIGGS OHV CARB
« on: June 23, 2010, 09:58:26 am »
I was wondering if there was a trick to getting the new main jet into the carb. i couldn't get the old one out so i drilled it out and now the new one is hard to get scrwed in. Is there a special tool to use. I got the carb rebuild kit from briggs. any help would be helpfull

12
Chassis / Re: Front end clearance
« on: April 14, 2009, 02:42:50 pm »
Where from racer guy? I have the same set you have. I bought the ec front end with the preditor spindles. What frame are you using? I have plenty of clearance

13
Kohler Engines / Re: 15.5 hp
« on: October 08, 2008, 10:57:56 am »
Sorry for that. The programs at require everything to be in cap. So used to leaving it on>
sorry left out work

14
Kohler Engines / Re: 15.5 hp
« on: October 08, 2008, 08:42:18 am »
WOW 8000 RPM I THINK I AM GOING TO RY MINE AGAIN AND SEE IF IT WILL HOLD IT. THE ONLY PLACE I HAVE FOUND A FLYWHEEL IS MIDWEST SUPER CUB. THEY HAVE AN ADJUSTABLE FLYWHEEL BUT THE TAPPER ON THE CRANK IS DIFFERANT TAPPER IS WHAT THEY TOLD ME. THE FLYWHEEL CAN BE MADE EASY. MY DAD IS A MACHINEST AND IS MAKING ONE FOR MINE

15
Kohler Engines / Re: 15.5 hp
« on: October 07, 2008, 07:14:46 am »
they are a good motor. there is no aftermarket parts for them. the only thing i have found is lifters. i ran a stock one this past season good runner but just won't hold up with stock parts when you try to run alot of rpm's. briggs there alot more out there and the aftermaket parts are real easy to come by. the the parts are like starbucks you can find them on every corner.

Pages: [1] 2