Heymow - Lawnmower Racing Forum

Mower Building / Setup Help => Driveline => Topic started by: KEN ROBINSON on June 12, 2014, 10:41:22 am

Title: peerless 700 sprockets
Post by: KEN ROBINSON on June 12, 2014, 10:41:22 am
where do you get sprockets for a 700?
Title: Re: peerless 700 sprockets
Post by: Huffy044 on June 12, 2014, 11:34:29 am
I make mine, buy a go kart steering hub (it's the same size and spline for the 700O, then buy the  sproket of your choosing with a 1" bore, cut the flange off the hub, pressit on, weld it, heat it red hot and drop it into a bucket of oil.
Title: Re: peerless 700 sprockets
Post by: Rooster on June 12, 2014, 08:26:16 pm
Most run the adapter and sprockets from EC. There are a few sizes you can get from peerless dealer.