Heymow - Lawnmower Racing Forum

Mower Building / Setup Help => Driveline => Topic started by: Racer57 on January 09, 2014, 11:30:34 pm

Title: 700 extention/ jackshaft
Post by: Racer57 on January 09, 2014, 11:30:34 pm
Has anyone ever made a extention or jackshaft to come off from the output shaft of the 700 trans? I the shaft to have a 36 spline in it for a ec quick change, any Ideas, pics?
Title: Re: 700 extention/ jackshaft
Post by: Old school racer on January 10, 2014, 04:34:27 pm
You can buy a shaft and the coupler from a toro walk behind . I have been thinking of doing this .
http://glspartspro.com/mower-parts/coupler-786108-tecumseh.html this is the coupler
776230 or 776231 are a couple of the extention shafts
Title: Re: 700 extention/ jackshaft
Post by: turftracracer19 on January 30, 2014, 12:06:20 am
I just built an extension with no machining involved using parts of an old 700. Here's a link to my build. Youll find the pics as to how I built it in my thread.

http://woochat.freeforums.net/thread/89/mod-mtd-build