Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Rooster

Pages: 1 2 [3] 4 5 ... 431
31
Briggs Flathead / Re: 18 hp replacement coil
« on: August 08, 2014, 03:15:47 pm »
I have heard there is a new coil out for the Oppy's.
Was also told they are alot better now.
I have not tried one myself.

Of course I have plenty of used ones that work just fine. lol

32
Briggs Flathead / Re: Oppy Carb Issue
« on: August 08, 2014, 03:14:01 pm »
Im having the same problem with mine the last fue races, on a left turn it missfires then picks back up, ive changed the carb , plugs and coil and still no joy. hope theres a solution
What are you using as a fuel pump?


33
Coffee Shop / Re: It's a great day!!!
« on: August 08, 2014, 09:33:07 am »
MUST BE GOOD FOR THEM TOO, THEIR ARE ABOVE THE DIRT ALSO! EVEN YOU BERT! AFTER WHAT I HAVE BEEN THROUGH REALLY! THAT GRIM REAPER CAN KISS MY YOU KNOW WHAT!!
Tailfeathers?!?!?!?!

34
Briggs OHV & Vanguard / Re: Intek v twin
« on: August 07, 2014, 02:33:17 pm »
They are both 40 cubic inch engines, the "6" & the "7" are the "basic design series", I have yet tp get anyone to tell me what that means?

35
Briggs OHV & Vanguard / Re: Intek v twin
« on: August 07, 2014, 01:05:26 pm »
Are you SURE you have a #457777???

36
Newcomers / Re: HELP any basic MTD lawn tractor I/c 502cc 15.5 builds
« on: August 06, 2014, 09:29:05 pm »
I thought it'd be more entertaining and way more fun than "Dear sweet Mr Newbie, we don't do that here....yada yada, gets old...."

WELCOME TO HEYMOW CLASHEZ....did ya know, the King of Mower Racing is like in your back yard!!!

37
Newcomers / Re: HELP any basic MTD lawn tractor I/c 502cc 15.5 builds
« on: August 06, 2014, 04:41:25 pm »
your on the wrong forum
try
http://rooster130.wix.com/killmyselfonamower

too bad there are no real mower racers near Cleveland Tennessee...

38
Newcomers / Re: im a newb
« on: August 06, 2014, 09:38:12 am »
That is a great group of guys your going to be running with.

39
Newcomers / Re: c/p class clarification
« on: August 06, 2014, 09:33:13 am »
LOL...lets just say the USLMRA rules are...ummm...Fundamental ;)

40
Newcomers / Re: c/p class clarification
« on: August 05, 2014, 02:47:04 pm »
Several respected US veteran racers are running the Kohler/ Carter K series carbs on the Kohler command single in the CP class, and they are legal. As long as the carb is made by the same manufacturer as the engine, it is legal to use. If this wasn't true, you wouldn't be able to run the vanguard nikki/tikki v-twin carb on the intek v-twin, or the EC two barrel carbs on the intek or any other engine for that matter. Also, several people run the bigger 17hp Tecumseh plastic bowl carbs on the 8/10hp Tecumseh AP engines, all legal, and the list goes on from there... And as far as intakes and adapters, Kohler command OHV single cylinders don't even have an intake manifold. There is only a 3/4" plastic spacer/insulator between the carb and head. As long as its a Kohler manufactured carb, you are good to go.
Well if everyone is doing it I guess it's legal?

41
Newcomers / Re: c/p class clarification
« on: August 05, 2014, 11:44:05 am »
stock manifold and carb  to the motor you have.   Making a plate would not be legal     Kolhler carb on a kohler motor 


Notice "To the Motor you have"..."Kohler carb on a Kohler motor" is not completely Accurate...

I am not a Kohler know it all by any means. But I do not believe Kohler ever put the K Carbs on the Commands?

If the Carb was not used on the engine that you are running, it is not legal. So for your Application it would have to be Command OHV Single carb on a Command OHV Single engine.

If you want a for sure and definite answer, you can get ahold of Manny Torres Or Kerry Evans through letsmow.com and they can give you an official rulling.

Adapters, extensions, custom intakes and recast parts are not allowed!! With the exception of Air cleaner adapters.


42
Racing Mower Builds / Re: Building a FXS
« on: August 05, 2014, 11:32:05 am »
Thanks Rooster. We (Caroll Campbell and myself) are trying to make it all work. The spindle arms had to be in the rear due to the hood and the front bumper. We got some of those Wheel Horse hoods like you were telling me about when we were up at Tulsa. Are ya'll running any FXS class mowers up there? I know that Jeff is building one.
It is my opinion, and many will argue with this...LOL...That You can only get Ackerman correct with rear steer.
However, alot of people do it other ways and win races.

We have only Jeff running one now, I will be building one in the future, but that's probably a lonnng ways off, lol!

43
Racing Mower Builds / Re: Building a FXS
« on: August 04, 2014, 12:17:12 pm »
Glad to see those spindle arms in the rear, where they should be!
LOL

44
Tecumseh Engines / Re: Built ohv tecumseh vs briggs single (CP)
« on: August 04, 2014, 08:57:37 am »
It is always fun!!

Tanner if that's one of Ed's...try not to embarrass everybody with it too badly ;)

45
Tecumseh Engines / Re: Built ohv tecumseh vs briggs single (CP)
« on: August 04, 2014, 08:39:14 am »
The biggest whoopin's i ever got all came from them dang Indians !!

Pages: 1 2 [3] 4 5 ... 431
anything