Heymow - Lawnmower Racing Forum

Engine Help => Briggs OHV & Vanguard => Topic started by: Brianrich877 on September 04, 2018, 11:30:38 am

Title: Big Bore 2 Barrel Carburetor
Post by: Brianrich877 on September 04, 2018, 11:30:38 am

I am looking for a big bore 2 Barrel Carburetor for V-Twin. I currently have an EC Dom gas carb that only has a 27mm exit bore and would like to know where to buy the Generac 32mm exit bore carburetor? Does anyone know what the actual part number is for these carburetors?

Title: Re: Big Bore 2 Barrel Carburetor
Post by: Johnson Mowersports on September 08, 2018, 10:39:50 pm

eBay.com but the carb want fit the stock intake on an inteknif that’s what you have it took a very large amount of porting the intake to make the throttle blades open intake will be weak and will eventually crack

Title: Re: Big Bore 2 Barrel Carburetor
Post by: crazycraftsman on September 08, 2018, 11:42:57 pm

Cromwell Racing sells the big bore race carb. Stage 3? I Believe it’s from a 35hp Kohler.

Title: Re: Big Bore 2 Barrel Carburetor
Post by: Brianrich877 on September 10, 2018, 12:31:50 am

So you can find them on eBay, do you recall the part number for that carb? Or what motor in came off of? I have searched on eBay and there is no way you can tell what the exit bore is on those carburetors.

Title: Re: Big Bore 2 Barrel Carburetor
Post by: PJG56 on September 10, 2018, 06:01:14 am

Here are part#'s for the 61 and 54 ci briggs vanguard carbs 845273 and 845274