1
Chassis / Seat on a F/X
« on: October 09, 2014, 10:13:54 am »
Alright guys im building a new F/X im using a rear engine rider. Does the seat have to be a lawnmower seat or can I use a kart seat? This is for F/X not FXS/FXT.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Honda and Clone Engines / Box Stock Clone
« on: May 19, 2014, 09:02:34 am »
I was thinking about buying a box stock engine for a mini pro I was wondering what billet flywheel still will let me use a pull start. Every site I found doesnt say anything about get a starter with it. I dont want use the go cart bump box to start. So I would like a pull start or the stock starter. Any one know what I should get
3
USLMRA Races / Racing on July 26
« on: April 20, 2014, 12:14:25 am »
I see there having a national race on July 26 well in Union Grove,Wisconsin they have had lawnmower races there for there county fair. Last year they let me and another guy race with them. Both of us where s/p mowers. Last year they had a stock class and mod class I heard they are having another class this year for our s/p mowers so they might have a stock class,mod class and s/p class mowers this year. I will try to find out more information about the race. But if they do have a class s/p mowers are welcomed to come race. Last year racing started at 9 and finish at noon. So if s/p mowers wanted to run there could. Its lake county is around 30-45 minutes away. They might have more classes to I will try to find out.
4
Chassis / Steering question
« on: February 16, 2014, 08:16:47 pm »
Can you use a rack and pinion on a prepared chassis?
5
Tires / 6x6.5 beadlock wheels
« on: February 09, 2014, 10:26:43 pm »
Does anyone know where I can get 6x6.5 beadlock wheels? Qrc only offer 6x6 then the next size is 6x7.5.
6
Driveline / EC Front Brakes
« on: January 15, 2014, 06:58:29 am »
Are Ec front brakes for keyed spindles or non keyed? Im looking for a set that go on non keyed soindle
7
Driveline / splined sprocket
« on: September 24, 2013, 08:39:02 am »
Does anyone know where I can get a splined 13 or 14 tooth sprocket? Its for a fine spline peerless 700 tranny. Its only temporally for one race. Its #40 chain. Thanks
8
Honda and Clone Engines / Predator 420 starter
« on: June 15, 2013, 04:10:14 am »
I have a predator 420 in my f/x and I can't seem to find a replacement starter for. The local starter shop is having troubles getting one to. Anybody know where to get one?
9
Coffee Shop / Simplicity Mowers
« on: April 26, 2013, 06:32:19 am »
Has anyone ever used one? If so which model would be the simplest?
10
Chassis / In FX can you
« on: March 02, 2013, 06:23:39 pm »
In F/X can you make your own sheet metal?
11
Coffee Shop / FXS question
« on: February 08, 2013, 10:31:03 am »
Why is every one building a FXS? Am I missing something? Rule change or something? 
12
Chassis / Front axle question
« on: January 02, 2013, 07:48:54 am »
Does any one know were to get a front axle that is round like a piece of pipe for the beam. I know E.C. has one but I'm looking for one that has no bends. I also would like it complete so weld in and go. Thanks
13
Chassis / wiring problem
« on: July 23, 2012, 01:03:50 am »
I wired my mower and its not doing anything. I bought acmes wire kit and used there blueprint how to wire it but I got nothing. The engine has two wires a red and black hanging by the starter that run under the flywheel that they say not to use so do I just leave those wires hang there or run them to something? Also the solenoid has four things for the wire to connect to 3 of them are for hot (red) wires what's the fourth for? So What am I doing wrong??
14
Chassis / imow murray
« on: June 20, 2012, 07:15:34 pm »
I have a wide body Murray with a hydro rear end. What would be a good swap for the rear end?
15
Chassis / front end camber and caster
« on: May 20, 2012, 05:09:42 am »
On my f/x What would be a good camber and caster to run?
Pages: [1] 2