Heymow - Lawnmower Racing Forum
Mower Building / Setup Help => Driveline => Topic started by: Jeff McKelroy on April 29, 2014, 08:19:27 pm
-
Hey fellers,
Does anyone know who might manufacture a 1.25" ID carrier that is compatible with the 40-Tooth sprocket, that won't try to kick the chain off?
-
burris. get the one with just the fingers to mount sproket to. it was the only one i found to work with a sproket that small.
-
http://www.bmikarts.com/Heavy-Duty-Sprocket-Rotor-Hub-_p_1388.html
this one works......
-
Or jump up to a 44 tooth rear and add 1 tooth to the sprocket driving the axle ;)
-
Or jump up to a 44 tooth rear and add 1 tooth to the sprocket driving the axle ;)
Thats what i done
-
Or jump up to a 44 tooth rear and add 1 tooth to the sprocket driving the axle ;)
I understand that, but playing around with belt & chain speed, not just sprocket ratios, may require the use of a 40-tooth sprocket. Just wanting to have as many combinations as possible for my GP mower, especially if I get to go back to Tampico.
-
Jeff i've run the EC setup with good sucess