Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - KEN ROBINSON

Pages: [1] 2 3
1
Garden Tractor Pulling / bolens
« on: May 15, 2016, 05:48:49 pm »
is a fmc bolens h16 a good for pulling?

2
Briggs OHV & Vanguard / model 31
« on: March 31, 2016, 06:46:52 pm »
are all briggs singles with ohv model 31's?

3
Driveline / clutch
« on: March 25, 2016, 09:15:12 am »
do you use a mechanical clutch if you have a centrifugal clutch?

4
Driveline / clutch and jackshafts or comet torqe converter setup
« on: March 19, 2016, 07:10:17 pm »
i'm using a predator 420cc engine,short track.what setup would be easyer to tune

5
Coffee Shop / BUILDING STAND
« on: November 02, 2014, 03:25:04 pm »
show what you use when building a racing mower so newbee's can get some ideas

6
Chassis / SPINDLES
« on: October 15, 2014, 06:54:42 pm »
i want to make my own spindles.are the spindles you buy just 5/8 bolts? i got kart 3 hole hubs and they seem a little sloppy on a 5/8 bolt.i have some 5/8 steel rod and it wont fit in the hole.i could turn the rod down on my lathe.would that be better than using bolts?

7
Kohler Engines / kohler 15.5
« on: October 01, 2014, 07:02:30 pm »
how good is 15.5 command engine for racing stock? do they have more torque than a briggs?

8
Briggs OHV & Vanguard / v twin no spark
« on: September 27, 2014, 06:45:20 pm »
mower has been sitting for a year or two.there was a mouse nest under the cover and the kill wire was chewed so i unhooked them.flywheel is rusty.could that be the problem?both coils cant go at once can they?

9
Briggs OHV & Vanguard / ring gear
« on: September 26, 2014, 11:17:29 am »
do you just hammer the pins out to get the ring gear off? and do you use bolts to put on another?

10
Briggs OHV & Vanguard / heads
« on: September 22, 2014, 07:42:36 am »
will a 14.5 ohv head fit a 17.5 ohv

11
Briggs OHV & Vanguard / what model is my engine
« on: September 20, 2014, 11:53:38 am »
family ybsxs.5012vp 274826. and how do you tell if it is avs

12
Briggs Flathead / 11hp to 12hp parts
« on: September 18, 2014, 08:51:19 am »
will a coil and flywheel from a 11hp fit on a 12hp

13
Briggs Flathead / camshaft
« on: September 16, 2014, 03:24:30 pm »
will a 12hp cam fit in a 11hp?does the 12hp cam have more lift?

14
Briggs Flathead / 8 hp
« on: September 08, 2014, 02:41:12 pm »
will a flywheel from a syncro fit on a non syncro?

15
Briggs Flathead / 12.5 rod and piston
« on: September 07, 2014, 09:18:35 pm »
Is the rod and piston in a 12.5hp the same as in a 12hp?

Pages: [1] 2 3