Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Wade1978

Pages: [1] 2 3 ... 10
Non-Affiliated Races / Re: BTMRA Oct 11th.
« on: October 10, 2014, 11:01:23 AM »
Due to the amount of rain this week and more predicted for the weekend the race has been rescheduled for Oct. 18th with the same start times.

Non-Affiliated Races / Re: BTMRA 2014 Rule book
« on: January 09, 2014, 08:09:41 AM »
Read 3 times , saw pictures just making 100% sure. Thanks

anytime  :)

Non-Affiliated Races / Re: BTMRA 2014 Rule book
« on: January 08, 2014, 07:14:35 PM »
On the seat rule.If your running 16" rear tires you can cut out and drop seat down to 13 inches from ground ,so seat pan would be lower than tops of tires?

Yes, here is the rule:

* Seat pan area may be modified to allow seat lowering. Seat bottom will be no lower than 13 from the
ground. This means seat cutouts are permitted but the area must be closed in so there is no sharp or
protruding areas what so ever!!!

also there are some nice color pics in the rule book...

« on: November 28, 2013, 06:44:24 AM »
Happy Thanksgiving Everyone!!!

« on: November 03, 2013, 06:45:05 AM »
we are definitely having a blast this weekend at the All American   :burnout:

Newcomers / Re: New Guy All-In and Ready to Race IMOW- Needs Help
« on: September 24, 2013, 12:24:40 AM »
It cost you twice as much to do it down the road..... seen it may times on here.
The newer racer says most of the time.... I wish I had done it differently the
first time. Here you are hearing to do it more right the first time, than just
getting on the track now. I know it is not what you want to hear, but that is
the truth.

I'll add some to that
Ambulance ride: *$600+
ER Visit and X-rays: *$1500+++
Fun day of racing on a SAFE properly built racing mower: PRICELESS
(and a whole lot less painful)
(* prices are ballpark and from about 10 years ago)

Newcomers / Re: New Guy All-In and Ready to Race IMOW- Needs Help
« on: September 22, 2013, 11:20:18 PM »
that is a MTD chassis follow this build thread and you will build it once, build it right and be able to move up to faster classes with little more than an engine change later on

Coffee Shop / Re: Some help for my daughter's class project
« on: September 13, 2013, 11:52:41 PM »
need one from Alabama?

Briggs Flathead / Re: Flathead trouble
« on: July 31, 2013, 10:16:18 AM »
could be the coil or not flowing enough on top end with the 11hp head

Post your Pics! / Re: My new 2013 SP
« on: June 17, 2013, 11:50:23 PM »
Cool build there mate,  wish we get parts cheaply here in Australia I particularly like the wheels ... My stock Murray wheels are letting the side down here.

Thanks, my wheels are from 8x8 with 4x4 hubs on the back and 6x7 on front with 3 lug kart hubs much better for racing than stock

Post your Pics! / My new 2013 SP
« on: June 11, 2013, 12:50:41 AM »
finally done and ready to go


Coffee Shop / Re: Cool Racecar For Sale
« on: May 25, 2013, 08:39:52 AM »
 :lol2:   :rofl:

Coffee Shop / Re: Ratio Calculator
« on: April 26, 2013, 11:54:28 PM »
here is the current link to the EC calculator

Pages: [1] 2 3 ... 10