Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hilljack

Pages: [1]
1
Briggs OHV & Vanguard / Re: intek trouble
« on: August 01, 2008, 09:26:04 pm »
valves were not the problem. i changed intake and carb from another engine and my runs better than ever. thanks for all the help.

2
Briggs OHV & Vanguard / Re: intek trouble
« on: July 10, 2008, 09:40:03 pm »
dont have tach on yet. when I get it on I will let you know some numbers.

3
Briggs OHV & Vanguard / Re: intek trouble
« on: July 10, 2008, 09:30:04 pm »
changed valve springs and that didn't help. i am not sure the valves are floating. could it be i am losing spark at higher rpm's? when the motor cuts out it starts to puff black smoke. checked the plugs and they look sooty black.

4
Briggs OHV & Vanguard / Re: intek trouble
« on: July 10, 2008, 02:22:21 pm »
the gov. is unhooked. I am running straight off the carb

5
Briggs OHV & Vanguard / Re: intek trouble
« on: July 10, 2008, 02:09:44 pm »
what should be my next thing to check?

6
Briggs OHV & Vanguard / intek trouble
« on: July 10, 2008, 09:57:19 am »
I have a 407777 intek engine that at around half throttle it cuts out. It sounds like the valves are floating.I have changed carbs,coils, fuel pump,adjusted the valves.I am out of ideas. has anyone ever had this problem?

Pages: [1]
anything