Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mannis97

Pages: [1] 2
1
Briggs OHV & Vanguard / Re: Precision .265 cam.
« on: September 23, 2009, 12:52:30 am »
so are you saying to use the bandelareos cam?

2
Briggs Flathead / Re: Difference in opposed twins
« on: July 16, 2009, 10:33:29 pm »
i have a pressure lube 46" motor if you wanna buy 1.

3
Briggs OHV & Vanguard / Re: cam
« on: June 30, 2009, 11:20:45 pm »
thanks man. by the way, do you still have those vanny heads with the big valves for sale?

4
Briggs OHV & Vanguard / Re: cam
« on: June 30, 2009, 10:05:43 pm »
thanks AGAIN George. i'm fishin' in the dark here so anybody got any suggesstions for a camto put in a 16hp vanny w/23hp heads and 2barrel carb?

5
Briggs OHV & Vanguard / Re: cam
« on: June 29, 2009, 09:53:46 pm »
 :D thanx George. actually how much bigger than stock is that? i mean, how much grindding is there for a little bigger, say 350 or 370 lift?

6
Briggs OHV & Vanguard / Re: cam
« on: June 29, 2009, 09:37:47 pm »
i've been raceing NASCAR modifieds for 12 years and have helped and watched 800hp ford motors being built hundreds of times. i have a milk crate full of cams we tryed and didn't like. trust me, i understand how cams work. just wana how much lift i can go without alot of dremmeling. thanks in advance :D

7
Briggs OHV & Vanguard / Re: vanguard v-twin head swaps
« on: June 24, 2009, 10:56:56 pm »
do the 23 heads on a 16 make a big difference? gonna put a 2 barell caarb and i wanna put a can in eventually.

8
Briggs OHV & Vanguard / Re: cam
« on: June 24, 2009, 10:48:23 pm »
i would like to hear the answer to this one.

9
Briggs Flathead / Re: Difference in opposed twins
« on: June 18, 2009, 09:53:44 pm »
no, it loses R's in the corners a little but they are huge.

10
Briggs Flathead / Re: Difference in opposed twins
« on: June 18, 2009, 02:42:43 am »
so if i put a 40" stock cam in my 46" i will feel the gain o the top end, bottom end or all around? our track is pretty big and when the suface has some laps on it, i can flat foot it all the way around so more top end would be great :woo:

11
Briggs OHV & Vanguard / Re: do vang. head fit intek?
« on: February 25, 2009, 10:02:58 pm »
thanks.

12
Briggs OHV & Vanguard / Re: do vang. head fit intek?
« on: February 25, 2009, 09:57:27 pm »
 :bash: ok, so do i put the 2 barrell carb on it or do i go with a bigger single carb?

13
Briggs OHV & Vanguard / Re: do vang. head fit intek?
« on: February 24, 2009, 10:27:09 pm »
so, you are saying that the 16hp heads are the best of all the vany heads? i'm buying a 2 barrell carb and intake. you dont think i should go with heads that have bigger valves?

14
Briggs OHV & Vanguard / Re: do vang. head fit intek?
« on: February 23, 2009, 08:11:14 pm »
i cant do like we ford guys do with cleveland heads on a winsor?

15
Briggs OHV & Vanguard / Re: do vang. head fit intek?
« on: February 20, 2009, 08:58:57 pm »
what heads would you guys say to run on the this 16 vany? im gonna put a 2 barrell carb and intake on it, cam, and eventually a flywheel. which heads have the biggest valves?

Pages: [1] 2
anything