Heymow - Lawnmower Racing Forum

General => Post Your Pictures/Video => Post your Pics! => Topic started by: austinandtina on April 04, 2015, 12:34:46 am

Title: Gp class first race build
Post by: austinandtina on April 04, 2015, 12:34:46 am: (http://tapatalk.imageshack.com/v2/15/04/03/abd79b76446ac776a0997146fe7d0064.jpg)(http://tapatalk.imageshack.com/v2/15/04/03/78c805716c5e915b5973dd305679a691.jpg) that is what it looked like when I bought this chasis. we are currant ly reinforcing frame and re doing steering. Then comes the kart rear end stuff (http://tapatalk.imageshack.com/v2/15/04/03/e0a3a8a4a53308376fdd9bef9a2c7ae6.jpg) this is the motor that's going in. (http://tapatalk.imageshack.com/v2/15/04/03/d1d3bfdbf89dc1f1f8591508fbf21afc.jpg)
Title: Re:
Post by: austinandtina on April 04, 2015, 12:37:05 am: Now this will be my first year and I really didn't like the fenders and hood so I will be putting murray wide body...I think fenders...and a old school sears hood
Title: Re: Gp class first race build
Post by: austinandtina on April 05, 2015, 09:19:34 pm: This is what it looks like now kinda mocked up and I think I may keep these fenders looks kinda mean(http://tapatalk.imageshack.com/v2/15/04/05/c0bbe82b46657115f0fcf393ff1a5eef.jpg)
Title: Re: Gp class first race build
Post by: EUBANK RACING on April 06, 2015, 06:14:25 pm: KEEP THE HOOD ALSO
Title: Re: Gp class first race build
Post by: cycloneracer on April 06, 2015, 07:55:11 pm: If you read the rules your suppose to run the sheet metal from the same company as the frame.
Title: Re: Re: Gp class first race build
Post by: austinandtina on April 07, 2015, 05:39:44 pm: Quote from: EUBANK RACING on April 06, 2015, 06:14:25 pm
KEEP THE HOOD ALSO
Lol funny guy I have another hood the one that was on it was a little too cut up
Title: Re: Re: Gp class first race build
Post by: austinandtina on April 07, 2015, 05:41:01 pm: Quote from: cycloneracer on April 06, 2015, 07:55:11 pm
If you read the rules your suppose to run the sheet metal from the same company as the frame.
Wasn't aware of that rule the way I took it as long as it came from a mower and looked stock you were good
Title: Re:
Post by: austinandtina on April 07, 2015, 05:43:19 pm: Il have to take another look at our rule book and see what it says but I am going to keep the stock fenders I like them anyway now. The only body part changed will be the hood
Title: Re: Gp class first race build
Post by: austinandtina on April 07, 2015, 05:44:09 pm: To this one (http://tapatalk.imageshack.com/v2/15/04/07/7bfd83bc0e649da7a897dbcb6ece7577.jpg)
Title: Re: Gp class first race build
Post by: cycloneracer on April 07, 2015, 07:13:39 pm: If your running USLMRA GP it has to be stock or same company sheet metal.

Local rules may vary but you won't be legal at a national event.
Title: Re:
Post by: austinandtina on April 08, 2015, 01:01:16 am: We have one national race at the end of august that I want to race at our local track so I guess il have to see about finding a stock hood by then for a 74 dynamark
Title: Re: Gp class first race build
Post by: cycloneracer on April 08, 2015, 10:36:28 am: Doesn't have to be the exact hood. Just from the same company and look like it belongs on the mower.

What happened to the stock hood?
Title: Re:
Post by: austinandtina on April 08, 2015, 12:41:41 pm: I still have it. It is just really cut up and not much left of it
Title: Re:
Post by: austinandtina on April 12, 2015, 08:05:44 pm: Well got my hole cut out for the transmission. The transmission plate cut and welded in and a tie rod up front.
Title: Re:
Post by: austinandtina on June 27, 2015, 12:43:09 pm: Well sorry it's been awhile since I've posted been busy with work and racing. Got it done for now. Came in last first two races running a 14 48 sprocket setup switched to a 13 44 and next race is tonight il let ya know how it went but here it is right now
Title: Re: Gp class first race build
Post by: austinandtina on June 29, 2015, 10:53:46 am: (http://images.tapatalk-cdn.com/15/06/28/2973d79cd5750c17230b3c001765b552.jpg)