1
Coffee Shop / long time
« on: April 16, 2013, 07:48:46 pm »
Hello everyone, it has been a long time. Just thought I would let everyone know I am alive and hopefully making a come back to the sport.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Coffee Shop / Racer in need of help! !!!!
« on: March 04, 2012, 09:48:26 pm »
Dear fellow racers and friends,
I am in need of help, my wife has filed divorce. This isn't what I want and I love my wife and kids, but my wife feels that our marriage is irretrievably broken. Eventhough she loves me. Surprised? Me too!
Anyways, Currently I can not afford to attain an attorney and my credit status is poor at the moment. So, what I am asking is if or any fellow racer or friend is willing to donate a few dollars in order to help me attain an attorney. This isn't to benefit me, but to helpe to gain 50/50 custody or full custody of my daughter. If anyone is willing to help you can send donations via paypal. If not that perfectly understandable.
Thanx!
Ty
I am in need of help, my wife has filed divorce. This isn't what I want and I love my wife and kids, but my wife feels that our marriage is irretrievably broken. Eventhough she loves me. Surprised? Me too!
Anyways, Currently I can not afford to attain an attorney and my credit status is poor at the moment. So, what I am asking is if or any fellow racer or friend is willing to donate a few dollars in order to help me attain an attorney. This isn't to benefit me, but to helpe to gain 50/50 custody or full custody of my daughter. If anyone is willing to help you can send donations via paypal. If not that perfectly understandable.
Thanx!
Ty
3
Garden Tractor Pulling / Cam ?
« on: April 03, 2011, 11:58:24 pm »
Well, I'm helping a buddy out with his pulling tractor AGAIN and would like some idea what cam grind would be recommended? The motor that is being built is 44 cu. Intek. Any Ideas would be appreciated, Once I know what would be good, I'll plan on putting the order in for the parts needed.
4
Post your Pics! / Ty's 2010 sportsman misc. build pics- Toro
« on: January 28, 2011, 11:13:44 pm »
Few build pics that I never posted from last season of my Toro when being built. Sorry not in any particular order.
5
Post your Pics! / Long Over Due- Wifes 2011 Sportsman
« on: January 28, 2011, 10:31:04 pm »
Was goin post in build section, but somehow I missing certain pics. So, I'll post here on what has been done so far.This has been a long over due project that I started 2 seasons ago, my wifes mower.It's an old Craftsman, same thing that Hitch has ran.
6
Briggs Flathead / Off the wall Question on a Flatty
« on: June 10, 2010, 01:32:10 am »
Tonite I was putting my flatty back together and was wondering. Why do ya set the valve lash on the alt212 cam to .014? Considering the normal valve lash is around somewhere to .007-.009 and the gienger cam is around .006-.008. Also was wondering when not on compression stroke that both valves are staying open and or/if this is normal?
7
Post your Pics! / 2010 sportsman walk thru
« on: April 27, 2010, 08:06:55 pm »
Anyways I thought I would share a few pics of what I have been working on, but not goin to reveal the machine just yet .
I will be finishing up mower shortly since my wife is only giving 8 days to have it up running and painted. I will have pics of the finished machine when done.
I will be finishing up mower shortly since my wife is only giving 8 days to have it up running and painted. I will have pics of the finished machine when done.
8
Post your Pics! / Mod-X walk thru
« on: April 14, 2009, 11:22:05 pm »
Just thought I would share a few pics of the work I have been doin for a friend that is getting into lawnmower racing. The chassis I am building is 1996 MTD walk thru that is getting built for Mod-X class.I would go thru with more details, but pics should give a general idea of what is been done.
Sorry all the pics were taken with mower standing up, I would of set mower in regular position, but I messed my back up the other day at work.
Sorry all the pics were taken with mower standing up, I would of set mower in regular position, but I messed my back up the other day at work.
9
Briggs OHV & Vanguard / AVS ?
« on: April 07, 2009, 08:00:06 pm »
Does anyone know if there ARC parts available for the AVS 31/33 cu. engine ? I'm only asking, since a friend of mine was planning on building an engine.
10
Chassis / height measurement
« on: March 18, 2009, 03:09:25 pm »
I need know what the measurement is from ground to center of axle. 1 1/4 axle w/16-7.5-8 tires. I would do this myself, but I currently don't have any 16-7.50-8 tires and rims left. Planning on slowly build a new super mod twin/single for next season.
Thanx!
Ty
Thanx!
Ty
11
Briggs Flathead / need part # again
« on: March 02, 2009, 08:33:07 am »
I thought it was on here somewhere, but can't remember where. But anyways, I need the part numbers
for the .010 oversize avs piston and also .020 oversize avs rings number too.
Thanx!
Ty
for the .010 oversize avs piston and also .020 oversize avs rings number too.
Thanx!
Ty
12
Chassis / EC clutch pulleys
« on: December 26, 2008, 07:51:36 pm »Can I purchase the ec clutch pulleys by themselves or do I have to purchase the whole clutch setup?
13
Briggs Flathead / Starter ?= part nos.
« on: November 19, 2008, 10:31:32 pm »
Does anyone have the oem part number(s) for the heavy duty(long body ) starter and the number of teeth? modified 12 hp flatty w/stock flywheel. I need to purchase a new one, my current one is getting tired.
14
Tires / metric and standard rims
« on: October 22, 2008, 07:16:36 pm »
what is the difference in bolt pattern on standard and metric kart rims?
15
Tires / Intemediates and Rain tires
« on: October 17, 2008, 07:27:58 pm »
I was searching the web and came across a website for kart tires, www.wholesalekart.com . They carry Continental kart tires. Priced to sell,don't think you can get tires any cheaper than they offer.Check them out.