Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - docbro

Pages: [1] 2 3 ... 22
Driveline / Re: Gear box
« on: October 10, 2017, 04:36:48 PM »
Turn it around, move it over to the left a little, and move your sprocket hub to the left side, and make it drive the left wheel.

Driveline / Re: max rpm for peerless 1050 right angle gear box .....
« on: September 20, 2017, 01:35:46 AM »
Mine are set up with 2:1 sprocket ratios on both FXT and FXS.  So my RAGB turns 1/2 the RPMs that my engine does.  Mostly, it will depend on your ratios and engine RPMs.

Tires / Re: FXS 6in vs 8in
« on: June 27, 2017, 09:50:54 PM »
6 in rear wheels give less rotating mass, and gearing is different.  I have ran both in the FXT, and prefer the 6" in the rear.  I feel they also have less side wall flex.

Hope this helps.  It was great to meet you this past weekend.

Briggs OHV & Vanguard / Re: Briggs model 33 billet crank gear
« on: May 21, 2017, 10:16:34 PM »
Did you check with Hitch?  He was out a couple of years ago, but may have come now.

Chassis / Re: FXS/FXT Axle help?
« on: March 14, 2017, 09:36:46 PM »
Tom,  I sent you a PM.


Coffee Shop / Re: Holiday Message From Manny Torres,
« on: December 22, 2016, 12:09:52 AM »
True words from a true Gentleman.  Have a very blessed and merry Christmas with your family!!

Chassis / Re: Independant Front suspension On Racing mower????
« on: July 04, 2016, 06:30:11 PM »
Solid front axle, no suspension of any kind on front or rear axles.  Who are you racing with?  Neither USLMRA or ARMA allow suspended front axles or rear axles.  Hope this helps.  Rule books are available online.. just type in the organization you plan on running.

This can be done, no problems.  I would rather use the intake for pulse than the Valve cover.  Cleaner, and a direct draw from the valve.

Newcomers / Re: newbie
« on: July 02, 2016, 01:52:35 PM »
Prince Edward Island?

Coffee Shop / Re: WONDERFUL DAY
« on: May 09, 2016, 03:29:54 PM »
No greater words spoken George.!!!!!!

Coffee Shop / Re: EC NEW WEB SITE
« on: April 27, 2016, 06:38:05 AM »
Are all products listed?  I cant seem to find the FCRP 4055 chain tensioner on the site, so I cannot place my order online.


The rules state that the engine has to be one made for commercially available mowers. (for clarification)

Kohler Engines / Re: 15hp Kohler aluminum flywheel
« on: February 29, 2016, 08:25:23 PM »
I guess this if for a USLMRA GP, alum flywheels not needed for a governed engine, nor are they allowed in GP.  The only mod allowed is the exhaust.

Coffee Shop / Re: FXT and FXS bumper rule?
« on: January 16, 2016, 08:00:57 PM »

Newcomers / Re: Getting Started
« on: January 12, 2016, 03:26:58 PM »
Our home track is just north of Paragould, AR.  It would be about 1 to 1.5 hours from Dyersburg, through Caruthersville, HWY 412 through Kennett.

Pages: [1] 2 3 ... 22