1
Newcomers / Re: building a couple monster-ish mowers (that still mow)
« on: May 20, 2018, 12:52:53 am »
You could do like me and just make them yourself?
I used 6” discs cut from 3/8” steel, drilled and welded a 3/4” sheave to them and drilled out my bolt pattern. Then I welded 4 grade8 bolts through the bolt holes, and your all set. Total cost was about $20 (cut the discs from scrap from a local welder in town - freebie)
I used 6” discs cut from 3/8” steel, drilled and welded a 3/4” sheave to them and drilled out my bolt pattern. Then I welded 4 grade8 bolts through the bolt holes, and your all set. Total cost was about $20 (cut the discs from scrap from a local welder in town - freebie)