Heymow - Lawnmower Racing Forum

Mower Building / Setup Help => Chassis => Topic started by: KEN ROBINSON on July 07, 2014, 08:43:44 pm

Title: heim joimts
Post by: KEN ROBINSON on July 07, 2014, 08:43:44 pm
what size heim joints should i use for my spindle mount?
Title: Re: heim joimts
Post by: redline on July 07, 2014, 10:04:41 pm
5/8"
Title: Re: heim joimts
Post by: KEN ROBINSON on July 08, 2014, 08:03:28 am
where is the best place to get them
Title: Re: heim joimts
Post by: anzadon on July 08, 2014, 08:41:46 am
QS Components- Check the links section
Title: Re: heim joimts
Post by: Rooster on July 08, 2014, 08:53:15 am
QS Components- Check the links section

Wow...I've always used McMaster...but those look to be pretty good joints and a pretty good deal!
Title: Re: heim joimts
Post by: KEN ROBINSON on July 08, 2014, 10:07:45 am
thanks
Title: Re: heim joimts
Post by: stvn_VA on July 11, 2014, 11:10:51 am
My 5/8"Ø came from St. Croix Chassis

robertsparbel@gmail.com
Title: Re: heim joimts
Post by: anzadon on July 11, 2014, 11:37:06 am
Wow...I've always used McMaster...but those look to be pretty good joints and a pretty good deal!


Been using them for years-more than satisfactory- and FREE SHIPPING
Title: Re: heim joimts
Post by: George Herrin on July 11, 2014, 12:02:17 pm
I have used 1/2 for years and never had a failure.
Title: Re: heim joimts
Post by: Robert Sparbel on July 11, 2014, 02:09:55 pm
Quote
My 5/8"Ø came from St. Croix Chassis

robertsparbel@gmail.com

I sell both 1/2" and 5/8"
best way to reach me is by email


Thanks