Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Old school racer

Pages: [1] 2 3 ... 8
1
Driveline / 700 peerless 9 spline
« on: March 20, 2015, 08:54:13 pm »
Does anyone happen to know the part number for the sprocket for 9 spline output on the 700's
Thanks  

2
Coffee Shop / Re: Right angle gear box
« on: December 25, 2014, 03:34:41 pm »
I have used one on my superior for 5 years with no issues.

3
Coffee Shop / Re: roughriders info
« on: July 09, 2014, 09:46:14 pm »
Porterville sod slingers. Porterville Mich.

4
Driveline / Re: 700 extention/ jackshaft
« on: January 10, 2014, 04:34:27 pm »
You can buy a shaft and the coupler from a toro walk behind . I have been thinking of doing this .
http://glspartspro.com/mower-parts/coupler-786108-tecumseh.html this is the coupler
776230 or 776231 are a couple of the extention shafts

5
Coffee Shop / Re: Anyone going to Kelloge Arena indoor race?
« on: December 27, 2012, 04:35:37 pm »
I am hoping to attend with 1 machine >:D

6
Coffee Shop / Re: weld through primer
« on: December 20, 2012, 09:56:06 pm »
I use weld through primer on most of the builds I do. I figure it is better to have primer under the joints.  ;)

7
Briggs OHV & Vanguard / Re: stock rod?
« on: November 05, 2012, 06:29:39 pm »
I have run a stock bottom end in a 35  cube vanny for 4 years now. It has a billet flywheel and is ungoverened.

8
Coffee Shop / Re: Huffy044 (Tommy Daniels)
« on: August 29, 2012, 09:00:26 pm »
Thoughts and prayer for you and your family Tommy

9
Coffee Shop / Re: Tach with memory
« on: August 21, 2012, 01:24:59 pm »
Never used one of those but we have lots of guys using the Tiny Tach with recall and it works well.

10
Briggs OHV & Vanguard / Re: Ajustable high speed needle
« on: August 17, 2012, 06:13:27 am »
Thanks Marc

11
Briggs OHV & Vanguard / Re: Ajustable high speed needle
« on: August 16, 2012, 06:20:52 am »
You the best Marc   :D

12
Briggs OHV & Vanguard / Re: Ajustable high speed needle
« on: August 15, 2012, 09:55:10 pm »
Ok my southern friend what is the part # for the plug that replaces the anti backfire solienod on a single barrel carb on a vanny...Any way how have you been

13
Briggs OHV & Vanguard / Re: Ajustable high speed needle
« on: August 14, 2012, 08:00:29 pm »
has anyone ever made an adjustable needle for one.......... :confused:

14
Briggs OHV & Vanguard / Ajustable high speed needle
« on: August 13, 2012, 07:05:39 pm »
I have a 29 cube vanny stock in my daughter mower and is running rich. Is there a adjustable need that will fit in where the anti backfire solienod goes. Thanks Wade

15
Briggs OHV & Vanguard / Re: Grass Cutter Issue... with VIDEO!
« on: August 11, 2012, 09:18:50 am »
Brian look and see if the o ring is missing around the imusion tube .Had the fuel eat the one on mine and it would do the same thing.

Pages: [1] 2 3 ... 8
anything