1
Driveline / Re: RAGB gearing questions
« on: June 13, 2018, 09:09:52 am »
I have the governor removed from my engine, what ratio should I be around ?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Driveline / Re: RAGB gearing questions
« on: June 13, 2018, 07:02:38 am »
Belt clutch with 16x7.50x8
3
Driveline / RAGB gearing questions
« on: June 12, 2018, 09:06:16 pm »
Hello all, I have a racing mower with a 18HP vangaurd (stock), it’s got a 5 “ engine pulley 10” gear box, then a 16 tooth to 60. What do I have wrong here my rear ratio is 3.75-1. My mower has no go down the straight. Any help be great 
4
Driveline / Re: What pulleys and sprockets to use
« on: October 20, 2017, 06:16:43 am »
Thanks for the reply I have them tow front sprockets ordered should be in today, i was gonna try that set up and see.
5
Driveline / Re: What pulleys and sprockets to use
« on: October 19, 2017, 08:53:15 pm »
When I first got the mower it was running a 5 and 7 and 11 and 54 sprockets. It does seem to work a little better now thou!. Should I change the sprockets any with the 3.5 and 7.?
6
Driveline / Re: What pulleys and sprockets to use
« on: October 19, 2017, 08:13:18 pm »
I run 16 7-50 -8. The motor don’t seem to be maxed out but I’m listening
7
Driveline / What pulleys and sprockets to use
« on: October 19, 2017, 07:46:05 pm »
Hello all. I’m looking for some information on pulley to chain and sprockets sizes, I’m running a 18 hp vangaurd all stock. I am using a peerless ragb. 1-1 ratio, and I was wondering if anyone could lead me into the right direction as to what do try for pulleys and sprockets? Our tracks are 200’ to 225’ long the setbup I have now seems to leave me lazy out of the corners. I have a 6 on my engine and 10 on the box with a 16 tooth to a 60 tooth? Any info be great
8
Briggs OHV & Vanguard / Witch motor to use intak or vanguard
« on: June 18, 2017, 10:30:13 pm »
Hey all. New to the site and to racing. I have a 20hp v twin intak and a 16 hp vanguard, witch motor would be beat to use? We run on grass and track is 125-150 feet long, what can I do to either motor to get a little more out of them?
Pages: [1]