Heymow - Lawnmower Racing Forum
Engine Help => Tecumseh Engines => Topic started by: MOWtivator on April 18, 2013, 10:00:53 pm
-
I am looking for a coil for my tech v twin...I believe its a 40 or 41 can anyone help?
-
Techumseh only made one v-twin, and it's a 42ci. (well, if you go by model numbers, technically 3)
A stock coil?
-
What if I am getting a billet fly wheel? Do I need a briggs coil..and thank you
-
Yup the intek twin or briggs single ohv or any briggs twin for that matter they all work if your getting a billet wheel You will also need a vanny coil wire harness or reverse the diodes in the original harness when using the briggs coils
-
I took some coils off a vanguard, and one of them would not work due to the plu wire being too short. Do the intek motors have longer plug wires? Or should I get a pair of ohv single Briggs coils?
-
make sure you don't have the coil upside down, that's all i can think of.
-
Got a set of coils off an intek twin today. The plug wire on them was about an inch longer than the vanguard coils. They fit perfect.