Hi, im looking for a few good places to order a sprocket hub and two piece sprokets from, the only issue i have is that they need to be rather small between 40 and 50 teeth.
Also they need to be for #35 chain.
One more thing, preferable that they have pay pall, one because i don't have a credit card and because money orders take to long to send. Thanks,

Well this year i'm running a 12hp motor done up quite a bit, as much as i could do using oem parts, it has the 15hp ohv crank rod and piston the cam from a newer 12 because their quite a bit lighter valve work, port and polish work, and most any thing els mentionned in Don's video. now i'm running the two piece walboro carb and it runs fine when i'm out wide open but as soon as i let off the gas going into the corner the carb just floods fills with enough gas to stall motor and actualy leak out my air filter. ive messed with the ajustment screw to the point where its only like a quarter turn out and it doesn't help any thing. any of you guys have an idea of what might be going on here? Another thing, if i start it up it will idle for a few seconds then it just gets flooded again and fills the carb and stalls the motor. I should probably mention that i have a mikuni fuel pump on the motor to. Thanks for any info you guys might have, ive picked my braind to the point that i can't think of what it might be any more.

Hey I understand that the peerless 739 is one of the strongest 700 models, I was wondering if that applies to all of the tyranny's. Like I have a peerless 639 and I was wondering if it was the stronger model like the 739 would be?thanks,
Justin St. John

Well I was out in the shop today for a good 4 hours doing some little things that still need to be done before the season starts in about three months. I got rid of the diamond plate on the dash and filled in all the factory holes. And I remounted my tach on the hood instead of where it was on the dash and then I built a simple subframe for the back because I was experiencing some shifting off the frame side ways.

this is my subframe.





And this is what it looked like before I did the work.

hey i was just wondering wuts the best type of tire to run alot of ppl i knwo run the tuff masters but they are kinda expesive so i was wondering what all u guys run pictures are wellcome. thanx

k well this is the first mower ive actualy built for racing all my other ones are just for messing around. but this one is built for SOLTRA modified class all to spec. its got a 17 hp kohler magnum(free) and a run a peerless 700 series to a live axel its does 73 according to the callution thingy i found on this site. well let me know what u guys think. mind u its not painted in this picture but it is painted at this point i just dont have any pitures of it. oh and i know its not a john deere but thats what colour i painted it to look like infact the only part from a john deere is my peerless. but its ok i like john deere i figured it would look cool sitting next to my dad 300x. so let me know what u guys thing especialy the uslmra.