Heymow - Lawnmower Racing Forum

Engine Help => Kohler Engines => Topic started by: truckintyler on August 13, 2019, 03:20:53 pm

Title: ARC kohler flywheel gear
Post by: truckintyler on August 13, 2019, 03:20:53 pm

 Any issues with the ARC flywheel ring gear when installed on the  Kohler command twin ? 

Title: Re: ARC kohler flywheel gear
Post by: Negrey on August 18, 2019, 08:57:40 am

Are you having issues? Other than checking engagement I had no issues.

Title: Re: ARC kohler flywheel gear
Post by: truckintyler on August 19, 2019, 05:27:10 pm

 No issues , just pulled the trigger on a new flywheel for the command twin , just wanted to know if they have issues with the teeth being aluminum and starter teeth being steel .
 

Title: Re: ARC kohler flywheel gear
Post by: Negrey on August 20, 2019, 02:28:42 am

I haven't had issues, I'm not sure if anyone offers a steel ring gear either? You will also need a diode harness for the Briggs coils that get used with the flywheel, I took one off an intek, if you do a search you can find the exact diode number necessary. Will not run without it, unless you use two tethers.

Title: Re: ARC kohler flywheel gear
Post by: truckintyler on August 22, 2019, 09:40:34 pm

Yes I figured I needed the diode harness. 

 Are the stock hydraulic lifters good on a stock non-governed engine or swap them out for solid lifters and adjustable rockers ?

Title: Re: ARC kohler flywheel gear
Post by: Negrey on August 23, 2019, 01:27:44 am

I have solid lifters and adjustable rockers in mine, but it’s far from stock.