31
Briggs Flathead / Re: Opposed Twin Oil Mods
« on: January 13, 2011, 08:59:16 pm »
Dont think it would hurt.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Post your Pics! / Re: YAY i found a pic of the mower
« on: January 11, 2011, 11:25:55 pm »
Planned on it but if I gotta changed them very very often ima get hydraulic brake setup
33
Post your Pics! / Re: YAY i found a pic of the mower
« on: January 11, 2011, 11:19:37 pm »
Have the exact same mower, but different color has 350 to. Putting an opposed on it, live axle to. Adjustable front axle, was wondering if the band brake would be good for this? Fairly light and the motor pretty much stock. I was planning to get a new band for it
It also says mtd lawnflite on hood
It also says mtd lawnflite on hood
34
Briggs OHV & Vanguard / Re: 12v batt will not crank vanguard v-twin
« on: January 08, 2011, 02:10:09 pm »
Did you try changing the wires? Id make the wires as short as possible, but enough that they have slack and arent tight.
35
Briggs OHV & Vanguard / Re: avs rpms
« on: January 05, 2011, 10:29:10 am »
Yes its with gov, but the internal setup wont hold up to anything over that, and if it does not for long
37
Racing Mower Builds / Re: my f/x build
« on: January 05, 2011, 09:32:27 am »
With proper maintenace the heims shouldnt lock up with grit
38
Coffee Shop / Re: Machine work & balancing
« on: January 03, 2011, 07:09:03 pm »
Do you have a price list?
39
Briggs Flathead / Re: opposed twin aluminum flywheel
« on: December 28, 2010, 05:53:10 pm »
Arc has an opposed flywheel in production, Couldnt find it on Ec's site but im sure Arc has it on theirs
40
Coffee Shop / Re: Driver Eligibility by ability instead of age
« on: December 25, 2010, 03:31:43 pm »
I also agree with this, heck Sprint cars dont have an age limit, theirs 13 year olds driving 800hp cars! 
It should be based on the amount of skill you have, if you can drive safley and up to speed then you should be able to drive
It should be based on the amount of skill you have, if you can drive safley and up to speed then you should be able to drive
41
Coffee Shop / Re: Newbie to the sport
« on: December 23, 2010, 10:21:42 am »
From york county here
42
Briggs Flathead / Re: Briggs 10 hp
« on: December 23, 2010, 08:31:07 am »
get yourself a 28(12hp) They can be built to last pretty well, and run strong
43
Briggs OHV & Vanguard / Re: Which motor should I use.
« on: December 22, 2010, 09:19:54 pm »
Thats a hard decesion, You can put get more things for the OHV, but that depends on what your rules allow for engine modifications.
44
Driveline / 350 (Im stumped)
« on: December 19, 2010, 05:05:22 pm »
I have my peerless all rebuilt with bearings and seals, its together the way the diagram shows(with reverse removed).
Heres the problem, it will shift into all gears but with only ingage into two of the 3 gears possible(reverse removed).
I dont know the shift pattern but here is what i found
Forward and to the left is 3 to 1
Forward to the right it just spins the input
Back to the right is about 6.3 to 1
Back to the left it just spins on the input.
I cant figure out why it will only engage in them two gears and nothing more. Any suggestions?
Heres the problem, it will shift into all gears but with only ingage into two of the 3 gears possible(reverse removed).
I dont know the shift pattern but here is what i found
Forward and to the left is 3 to 1
Forward to the right it just spins the input
Back to the right is about 6.3 to 1
Back to the left it just spins on the input.
I cant figure out why it will only engage in them two gears and nothing more. Any suggestions?
45
Briggs Flathead / Re: "How to reseat valves" Video (for flathead and OHV) for beginners
« on: November 17, 2010, 08:49:42 am »Personally a Valve job is what ever it takes to get a motor running be it a simple lapping or complete replacement of seats and valves. Its simply a matter of opinion when in reality its simply whatever it takes to do the job. NO MATTER HOW SIMPLE OR HOW COMPLICATED. Its a valve job. You working on valves and its a job!!! THUS a valve JOB!!Agree +1