Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - philr85

Pages: [1] 2 3 ... 5
1
Non-Affiliated Races / oct 26 in central pa
« on: October 04, 2013, 12:47:16 am »
come to hillvalley speedway oct 26 they are having mowers come race need a couple more im asking anyone with a racing mower so spread the word its going to be alot of fun driver autographs kids treat night www.hillvalleyspeedway.com

2
Briggs Flathead / carb issue
« on: July 29, 2012, 10:36:04 pm »
i have a ungov 12.5 runs fine with the walbro carb i put a nikki on and it would only go put put put with throttle open and sprayed fuel out the air horn it is getting to much fuel but
why
and how do i fix it
i tried searching but i didnt see this problem im sure it was coverd im sorry to double post if i am
can i put a adjustable needle in the bowl?

3
Driveline / 700 tranny plate HELP!!
« on: May 02, 2012, 11:06:31 pm »
does anyone have a blueprint for a plate like ec sells? i got the 1/4" steel but no trans yet let me know if anyone does

4
Driveline / john deere tuff torque????
« on: November 21, 2011, 10:37:34 pm »
i found this online never heard of them anyone know if there anygood for racing looks heavy but may be close to a 820 peerless i dunno http://www.ebay.com/itm/JOHN-DEERE-GEAR-TRANSMISSION-240-260-GT242-GT262-TUFF-T-/130557410321?pt=LH_DefaultDomain_0&hash=item1e65d3fc11

5
Coffee Shop / wheel horse 265-6
« on: November 01, 2011, 07:33:52 pm »
i have a wheel horse 265-6 here im working on for a customer wont start by the switch i put a new solinoid in still nothing but i here this relay making noise now those could it be bad i dont know so maybe someone here does

6
Briggs Flathead / opposed twin input needed
« on: October 01, 2011, 02:44:16 pm »
hey guys im looking for input on the opposed but  i wanna know since i never seen or heard difrent has anyone ever ran 2 indivigual intakes and 2 carbs i relize this isnt alowed in most classes but im builing a CVS outlaw like the supermod twin and i am working on making a set of these intakes to run 2 model 56 carbs untill i find a better carb since i seen thise done with the vanny twins i figured id try myself and if it works well enough and anyones interested ill build a few extra and sell to anyone interested but i have to design the linkage and some may ned a fuel pump if gravitys not on your side ill have pics up tonight

7
Garden Tractor Pulling / sears SS14 wiring prob
« on: September 08, 2011, 05:54:48 pm »
im working on a sears ss14 and the current witing is junk someone tried and all the wires are red and when i hooked the battery up it sparked theres no switch or selinoid so i need to rewire it all and i cannot find a schematic its old 1960swith old starter/alt  and volt regulator if anyone can help let me know

8
Briggs Flathead / gonna build a opposed twin
« on: August 30, 2011, 10:07:21 pm »
ok i having been gathering parts i picked up a engine today i was tearing it down it was missing the access panel" and a piston/rod broken and i pulled the other piston out looked at it and it says 46 so i guess its a 46 cube but im new to the oppys so im thinking this is good but im gonna have to build it and probly cant get 46 parts just 42 easily so whats the diffrence between them?

9
Coffee Shop / odd, raced, and its legal how?
« on: August 26, 2011, 12:19:24 am »
i dont know if i can post this in coffee shop or where. my buddy was at mcconellsburg and witnessed this racing in i guess stock class. i dont get how and if the owners on her dont get offended i think its cool i have a murray aerovac im intriged so much as to build one if it is legal cuz its cool looking!
 

10
Tecumseh Engines / carb q
« on: August 17, 2011, 01:27:26 am »
tried looking and found nothing i must be doing something wrong but i got a carb from a 15hp tec enduro ohv and it looks like the ones on a briggs mod 28 so i scarfeed it im thinking of using it on my 12hp flatty has anyone tried it and how does the carb work better or worse it has a adjuster low by the bowl and the numbers stamped in it are 26A1179,1A7d1530
i posted here cuz its a tec part but if this needs moved i understand

11
Briggs Flathead / oppy carbs
« on: August 16, 2011, 09:05:18 pm »
i did some parts scrounging cuz i got friends with oppys whats the diff between the 3 bolt fuel pump and 4 bolt i got one of each and the 4 bolt one looks like new laser numbers too

692815
27-421
0714

12
Non-Affiliated Races / attn aupermods, imows, superstocks pa race
« on: August 15, 2011, 09:56:29 pm »
ok i need as many people as posible to show up with supermodified twins singles and imows and superstock  heck any safe built racing machine were having a exibition race to promote the sport at this track so please if u can make it come
date august 27th
at www.covevalleyspeedway.com
gates open at 4pm racing begins @6 pm

www.mapquest.com

covevalley speedway
425 Drake Road
Martinsburg, PA, 16662

for more info contact me

13
Briggs OHV & Vanguard / 18hp vanny mo 35
« on: August 14, 2011, 10:00:14 pm »
well i got one im gonna run on my supermodified twin and i been reasearching didnt see anything on the puchrods they look week well it looks like aluminum and steel and the alumium one is week and i was wondering are they and are aftermarket ones avalible

14
Racing Mower Builds / dynamark supermodified twin build
« on: August 14, 2011, 01:16:10 am »
added some braceing
  got it welded made it alot stiffer than before
put it together to see and working on the rear fender .
waiting on some goodies to come like the axle ect gonna get started on the front axle not much but i figured id share im gonna run a v twin vanny horizontal probly with cent clutch and jack shaft
sorry there not clickable and smaller next ones will be

15
Briggs OHV & Vanguard / v-twin vanny vs oppy!!?? <LOOK>
« on: July 21, 2011, 12:03:08 am »
ok i have a 19 opposed twin and i was talking to my buddy he has a vanny needs a lil work carb and fuel pump but he said he would trade should i can i get further with the vanny im thing i could i want to know what the vannys worth if it is junk or can handle running i know it isnt as tough as a intek but i want the community opinion

Pages: [1] 2 3 ... 5