Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - heavyweight

Pages: [1] 2
1
Garden Tractor Pulling / Re: any pullers in florida?
« on: January 09, 2013, 08:32:35 pm »
hey down here in fort myers we do garden tractor tug o wars 1000LBS driver and weight combined must be garden tractor tires no bigger than 26", 16 inch hitch hidth

2
Briggs Flathead / Re: spark plug location
« on: January 09, 2013, 08:24:16 pm »
no sir you cant run it in arma either i am a member i run  down here at our club what we call a modifed. 4 inchs off the ground, lawn mower tires , 8 inch rim in the rear 6 inch in the front 44 inchs wide and 4500 rpm governer. but this question was because i also have gotten envolved in our local tug o war tractor pulls.

3
Briggs Flathead / Re: spark plug location
« on: December 18, 2012, 08:20:02 am »
i have milled the fins out of my heads on my 42 centered the hole up and drilled it then tapped it with a spark plug tap. i have checked for clearance it clears it with a E3 plug. was debating on a fire slot. or i also hurd of grooving the head thought about that as well

4
Briggs Flathead / spark plug location
« on: December 17, 2012, 09:46:57 pm »
question.. on an opposed engine the spark plug is not directly over the piston. instead it comes in the side!! what would happen if you moved the spark plugs over the pistons. would you gain anything??

5
Briggs OHV & Vanguard / Re: Vtwin V.S. oppy
« on: July 18, 2011, 09:29:19 pm »
yo dude when i told u what i told u at the track i simple put it to you that from what i have read and researched that the oppy has better torq on the governer than the intek..... and as far as small hp oppys dude were all running 20 and 21 horse oppys and rules state u cant run bigger than a 25 horsepower in or modified class

6
Briggs Flathead / Re: 31 piston's in an oppy
« on: July 18, 2011, 09:15:26 pm »
I want to get banned for cussing.

7
Briggs Flathead / Re: 31 piston's in an oppy
« on: July 15, 2011, 11:22:39 am »
whats .4 joules??

8
Briggs Flathead / Re: 31 piston's in an oppy
« on: July 15, 2011, 10:31:22 am »
lol and just what is like factory specs rite now we are limited at 4500 rpm but i am thinkin about building a unlimited or i geuss for u goes it would be a super mod twin... how much power would you estimate it puts out??

9
Briggs Flathead / 31 piston's in an oppy
« on: July 14, 2011, 09:57:46 pm »
 ok so i have read all about this on other post's says hasnt been posted in 120 days so i am going to start a lil one of my own....

id like to know where i can get the sleeve's for this and the next thing i would love to know is how much power with the rite port work and carbration do u think it would put out????


10
Briggs Flathead / Re: New ARC rods for opposed twin
« on: July 14, 2011, 09:55:14 pm »
ok so i would like to know where i can get a set of sleeves or can the machine shop where i take it just get them for me????

11
Briggs Flathead / Re: Stock 13 flat head
« on: July 03, 2011, 08:42:12 pm »
yo mike man if u want get with me bring ur mower over and my dad and i will help you out ... just get with me

12
Briggs Flathead / Re: opposed throttle delay??
« on: June 25, 2011, 03:36:43 pm »
i am thinking about replacing the motor i think i am down on power

13
Briggs Flathead / Re: oppie clicking noise
« on: June 23, 2011, 07:53:14 pm »
opposed goes up to 46ci yes .... dude if u need to call me or want to call me email me and ill give u my number and if u and ur dad wanna come check out or stuff its cool we aint hiding nothing

14
Briggs Flathead / Re: opposed throttle delay??
« on: June 23, 2011, 07:51:49 pm »
yo roster i already took ur adive on turning it up i turn it up to 1800 rpm at an idle.... and i cant turn the carb around to even try it cause we are on the governer in my modifed class and have to stay at 4500 rpm


15
Briggs Flathead / Re: opposed throttle delay??
« on: June 23, 2011, 01:34:56 pm »
i have tryed that as well and its not like its loading up cause there is no caugh or even a reading on my plugs that i am Fat on fuel.... its running lean i have found that if i let it get back down to 3K from 4k that it doesnt do it but its just droping that thousand rpm thats killing me

Pages: [1] 2