Heymow - Lawnmower Racing Forum
Mower Building / Setup Help => Chassis => Topic started by: ccreech5464 on October 28, 2013, 02:12:48 pm
-
I have about six or eight inches of frame that extends past the front axle can I legally do away with that as it is in the way of my steering arm and from what I seen a lot of people are making custom mounts for the front of there hoods anyways ?
-
I have 6" past the front of my axle. My frame is notched for the tie rod
-
Or add a spacer to lower your tie rod I know of a couple mowers that did this with success
-
Not sure If you can see then worth a crap, but here how I did mine. Had to add nylon washers to them to raise up the tie rod to clear the frame. Works great.
(http://imageshack.us/a/img812/5300/65rr.jpg)
(http://imageshack.us/a/img809/1215/fio1.jpg)
(http://imageshack.us/a/img716/4585/74ox.jpg)
(http://imageshack.us/a/img705/2946/img0045ab.jpg)