Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cable1981

Pages: [1] 2 3
1
Briggs OHV & Vanguard / Re: GP fell flat on its face!
« on: June 26, 2020, 08:43:58 am »
I did think about carb setup as a potential problem, but had never adjusted anything from last season, so didn’t look too far into it. I now have a good deal of time to look deeper into both the carb and the tranny. I want to think carb since I watched the tach never move for 7 laps

2
Briggs OHV & Vanguard / Re: GP fell flat on its face!
« on: June 22, 2020, 03:18:17 pm »
I never lifted once. Full pull on the throttle the entire 10 laps.

3
Briggs OHV & Vanguard / Re: GP fell flat on its face!
« on: June 22, 2020, 09:14:12 am »
It honestly didn’t help changing gears. I also thought about anything that might be locked up or rubbing, everything moves around freely.
One idea I had was when my transmission was put together possibly gears were not put in order, but wouldn’t the engine still want to get up to governed speed?

4
Briggs OHV & Vanguard / GP fell flat on its face!
« on: June 21, 2020, 02:23:06 pm »
So at the race this weekend, went thru tech with my GP, everything went perfect as planned. Tach checked at 3540 where I had it set at. Got out on to the track and it was wet, ran really poorly, so I went down gears. Second heat race ran equally as poorly. I was able to watch my tach the entire race, 2950. Got back to the pits, put the clutch in grabbed a handful of throttle, 3540!!! What could cause the mower to bog down so much??? I never once got close to running a governed speed, but it rolled around like I was just out on a Sunday stroll thru the park! Any ideas much welcomed!

5
Mowers or Complete Setups / Re: 2 Complete Mowers for Sale
« on: February 13, 2019, 01:11:44 pm »
Yes they both are for sale

6
Trannys / Axles / Wheels / Re: Parts for Sale
« on: January 15, 2019, 11:25:15 am »
One compete axle set up and one transmission along with an assortment of sprockets and gears is what I have left

7
Trannys / Axles / Wheels / Re: Parts for Sale
« on: January 12, 2019, 12:17:55 pm »
Pm sent

8
Trannys / Axles / Wheels / Re: Parts for Sale
« on: December 02, 2018, 08:55:50 pm »
2 Peerless 700 race prepped

9
Trannys / Axles / Wheels / Re: Parts for Sale
« on: December 01, 2018, 01:20:46 pm »
Sent you a pm

10
Trannys / Axles / Wheels / Re: Parts for Sale
« on: November 20, 2018, 12:27:08 pm »
Pm sent

11
Trannys / Axles / Wheels / Re: Parts for Sale
« on: November 16, 2018, 11:27:37 am »
Pm sent

12
Mowers or Complete Setups / Re: 2 Complete Mowers for Sale
« on: November 15, 2018, 04:25:40 pm »
Last ditch effort here. Have dropped the price to 1000 for the pair of mowers, and if they can’t be sold will be parting them out.

13
Trannys / Axles / Wheels / Parts for Sale
« on: November 15, 2018, 04:21:48 pm »
Have 2 Peerless 700 race prepped transmissions.
Also have 2 complete 1 1/4 rear axles complete with 4 on 4 wheel hubs, mechanical caliper with rotors. Sprocket holder, assortment of #40 sprockets, and #40 transmission sprockets.
Would like to sell as a complete set up, but willing to break it apart. Make an offer on it

14
Mower Engines & Parts / Briggs 31 engine
« on: November 15, 2018, 04:16:18 pm »
Have a Briggs 31 for sale. Stock Crank with brass counterweights. Stock cam. Bored 020 over. Head shaved .080. EC outer springs and retainers. Kohler intake and a EC blueprinted carb.
Also have a stock 31 shortblock with billet doggone on crank.
Would prefer to sell whole, but willing to part out if i need to.

15
Mowers or Complete Setups / Re: 2 Complete Mowers for Sale
« on: August 21, 2018, 09:54:53 am »
Well I’ve just gotten the word, I have an upcoming surgery on my neck. In an effort to get these sold, I’m lowering the price to 1750, for the pair! Sale will come with all my extra sprockets and tranny gears, and a short block 31

Pages: [1] 2 3

anything