Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - MOWtivator

Pages: [1] 2 3
1
Briggs OHV & Vanguard / running a single on its side
« on: March 26, 2015, 04:11:08 am »
does anyone know if it is possible to run a ohv single on its side with the head pointing in the upward direction

2
Driveline / Re: gear ratio info
« on: August 07, 2014, 08:13:13 pm »
Thank you for the help

3
Driveline / gear ratio info
« on: August 07, 2014, 03:23:20 am »
I purchased a tractor that was a sportsman.....now I want to turn it into a arma class super stock...stock motor with governer....it has a 39 tooth rear sprocket..and I eed it to be 8 to 1 ratio every 8 turns of the motor I need 1 turn of the rear..anyone know a good formula...or what front tooth do I need to get 8to1..thanks for the help

4
Coffee Shop / carb question
« on: March 13, 2014, 01:08:01 am »
What series tillotson bolts up to a briggs ohv....and does anyone know the distance from center to center of the mounting bolt hole and the size of the intake on the head???...thank you

5
Coffee Shop / Re: super mod build rules
« on: March 07, 2014, 02:21:01 am »
I checked the rules I am wondering about off setting my axles..and opinions on how wide to make it

6
Coffee Shop / super mod build rules
« on: March 05, 2014, 07:42:04 pm »
I am looking to build a super mod single...what should I offset the front and rear axles...what is max width and wheel base...any help..thank you

7
Coffee Shop / super mod build rules
« on: January 29, 2014, 09:24:56 pm »
Does anyone know if I can make a custom frame or use a mower frame??

8
Coffee Shop / tillotson carbs
« on: January 02, 2014, 11:32:47 pm »
I am going to try a Tillotson HD carb....but I need to find a HD..to an HR 45 degree intake manifold...anyone know where I can look..thanks for all the help this year

9
Coffee Shop / how much to take off head
« on: December 18, 2013, 02:31:33 am »
I am running a 31.non avs ohv...I am getting head work done..how much should I get teken off..when decking the head..thanks

10
Coffee Shop / pulley ratio
« on: December 16, 2013, 01:52:16 am »
I am running a prox class ...with arma...I am currently running a 5" pulley on the motor & a 5" pulley on my rhgb..should I change it any info will help thanks

11
Briggs OHV & Vanguard / Re: single ohv keyway question
« on: September 06, 2013, 08:44:00 pm »
Flywheel key

12
Briggs OHV & Vanguard / single ohv keyway question
« on: September 05, 2013, 11:36:19 pm »
Does anyone know the exact dimensions of the key for a ohv briggs..31ci..thank you

13
Coffee Shop / Re: air pressure
« on: August 19, 2013, 07:06:07 pm »
Thank you I will put more info on

14
Coffee Shop / Re: air pressure
« on: August 18, 2013, 11:05:35 pm »
Burris kart rain tires...11.5 wide in the back....6.5 in the front I am just looking for a starting point
When I am racing seems like the front just plows

15
Coffee Shop / air pressure
« on: August 16, 2013, 03:11:22 am »
I am new to racing and need advice on air pressure....I am running a pro x..we run on really packed
Clay no banks what pressure should I run in my tires .

Pages: [1] 2 3