Heymow - Lawnmower Racing Forum

Mower Building / Setup Help => Driveline => Topic started by: mowpoweranything on May 09, 2014, 11:03:31 pm

Title: Right angle gearbox?
Post by: mowpoweranything on May 09, 2014, 11:03:31 pm

Ok guys I know this subject has probably been beaten to death but what type of right angle gearbox would hold up behind a 40ci intek twin i want something that will be reliable and there are so many out there i don't know which to choose. Can someone point me in the right direction please


                           Thanks in advance!

Title: Re: Right angle gearbox?
Post by: The Tank on May 09, 2014, 11:23:50 pm

Peerless 1000 series

Title: Re: Right angle gearbox?
Post by: mowpoweranything on May 09, 2014, 11:37:56 pm

Tank where can i find those type at!

Title: Re: Right angle gearbox?
Post by: The Tank on May 10, 2014, 05:00:12 pm

Any Peerless dealer should be able to get you one. EC also has them.
http://eccarburetors.com/store/precision-mower-accessories/right-angle-gearbox.html

Title: Re: Right angle gearbox?
Post by: mowpoweranything on May 10, 2014, 05:29:37 pm

Thanks tank I did some research and the 1050 gearbox looks to be a bit heavier duty with cast iron case I'mggoing to try and locate one of those units just don't know if it's a 1:1 ratio.

Title: Re: Right angle gearbox?
Post by: jerb on May 14, 2014, 12:12:11 am

last one i bought new was $180 from a dealer, for the life of me i cant remember part number but i am sure George has a number!

Title: Re: Right angle gearbox?
Post by: mowpoweranything on May 16, 2014, 02:04:54 am

U know part numbers would be awesome. I spent all day at the small engine shop trying to find some type of number and even called peerless and I still have no information or numbers! !!!!!

Title: Re: Right angle gearbox?
Post by: The Tank on May 16, 2014, 09:03:45 am

I don't have one for the one with the 3/4" output shaft but I run one with a 7/8" output shaft.

Peerless  2062-P91 RA series gearbox, P/N 794072. 7/8 input/output, keyed shafts.

Title: Re: Right angle gearbox?
Post by: mowpoweranything on May 16, 2014, 10:41:52 am

Thanks tank! !!!!!!