Heymow - Lawnmower Racing Forum

Mower Building / Setup Help => Garden Tractor Pulling => Topic started by: KeithB078 on October 27, 2009, 09:11:18 pm

Title: C120 GT Puller project begains
Post by: KeithB078 on October 27, 2009, 09:11:18 pm
Got the frame cleaned up , primed and painted

This tractor will be from at least 3 different tractors.

The frame and tin work is a C-160 eight speed, the trans is 8 speed 8 pinion from a C-81, the motor is a 12 HP Kohler from a C-120 Auto.

The C-160 tranny has to be taken apart and get new seals at some time, it will be a spare or go in another tractor.

Maybe i should name it Frankenstein biggrin.gif

This one will be a stock 12HP class

(http://keithb.frobozz.us/C120p2.jpg)

(http://keithb.frobozz.us/C120p3.jpg)

(http://keithb.frobozz.us/C120p4.jpg)

some more progress

(http://keithb.frobozz.us/C120p6.jpg)

(http://keithb.frobozz.us/C120p7.jpg)

(http://keithb.frobozz.us/C120p9.jpg)
running , replaced the fuel line with new, took it out and drove it around

Still have to build wheelie bars and mid and front weight brackets, and more tin work

(http://keithb.frobozz.us/C120p10.jpg)

(http://keithb.frobozz.us/C120p11.jpg)

(http://keithb.frobozz.us/C120p12.jpg)
Title: Re: C120 GT Puller project begains
Post by: goatmower on October 27, 2009, 09:46:30 pm
looks beastly  :omg:
Title: Re: C120 GT Puller project begains
Post by: gtpuller on October 27, 2009, 11:39:55 pm
Nice Tractor:
Title: Re: C120 GT Puller project begains
Post by: brandonmc on October 27, 2009, 11:47:46 pm
My 5 year old son has a tractor just like that one that he rides around in the yard nice tractor 8)
Title: Re: C120 GT Puller project begains
Post by: KeithB078 on October 28, 2009, 08:14:56 am
Thanks guys, still got some more painting. also plan to do some motor work, like a 18 HP OHV cam and shave the head
Title: Re: C120 GT Puller project begains
Post by: FlatheadPuller on October 28, 2009, 09:16:59 pm
Keith is that a hitch off ebay. If so how is its fitment. I am building a stock wheel horse for my son over the winter but with JD sheet metal. It will look like a 4020 from the early 70's when done. Our class is stock wheel base for chassis being used and stock engine on the governor at 4000 rpm.
Title: Re: C120 GT Puller project begains
Post by: KeithB078 on October 28, 2009, 09:30:32 pm
it is off Ebay. it fits very well. Was like $33.00. i plan to weld 4 tabs to it to bolt alum wheelies bars to
Title: Re: C120 GT Puller project begains
Post by: Tazz245 on August 09, 2011, 12:17:26 am
What hp is the motor?
Title: Re: C120 GT Puller project begains
Post by: Squidd on August 09, 2011, 01:53:06 am
Quote
This one will be a stock 12HP class
Title: Re: C120 GT Puller project begains
Post by: Rooster on August 09, 2011, 10:51:44 am
"Will Be" or "Was" I would hope this 2 year old build is done by now!
Title: Re: C120 GT Puller project begains
Post by: Burwell555 on August 09, 2011, 03:35:10 pm
Hard tellin, last time he was online was mid April!!