Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Burton for Certain

Pages: 1 2 [3] 4 5 ... 57
31
Briggs OHV & Vanguard / Re: Ultra Copper on exhaust gasket?
« on: May 01, 2013, 01:29:53 pm »
Idk about Briggs, but I've run it with and w/out gaskets on kohlers with no problems.

32
Coffee Shop / MWSC 1 1/8" clutch hub
« on: April 29, 2013, 11:03:43 pm »
Super Cub is making a run of 20 -1 1/8" replacement hubs for the bully turbo 1" clutch. Not sure on the price yet. You would buy the bully clutch and then buy the replacement hub from MWSC. So for all you billet crank boys, your dreams have almost come true!

33
Kohler Engines / Re: Kohler cv15 carb
« on: April 28, 2013, 08:03:13 pm »
Vaccuum pump. You'll float the mechanical pump. Been there, done that. Drill and tap the valve cover next to the vent for your pulse. Haven't had any issues.

34
Kohler Engines / Re: Kohler cv15 carb
« on: April 25, 2013, 03:40:35 pm »
It's the same as the being able to run a 2 barrel carb on the twins that came with a single barrel carb.

35
Non-Affiliated Races / Re: Monster mow down in Ohio
« on: April 25, 2013, 12:16:08 pm »
Any idea what the class order might be? It depends on whether or not a bring two or one.

36
Kohler Engines / Re: Kohler V-Twin discussion
« on: April 19, 2013, 08:56:20 pm »
Call Midwest or Lakota. I've run 3 diff cams in the kohler singles and twins. Runs awesome no matter what. Ya don't need to turn it hard either.

37
Non-Affiliated Races / Re: Monster mow down in Ohio
« on: April 19, 2013, 02:35:27 pm »

38
Garden Tractor Pulling / Re: CUB
« on: April 18, 2013, 12:03:36 am »
Don't weld too much. Bolt everything you can on. These frames are too stiff to start with.

39
Non-Affiliated Races / Re: Monster mow down in Ohio
« on: April 16, 2013, 08:58:28 pm »
Yes. Hot laps @ 3 pm.

40
Non-Affiliated Races / Re: Monster mow down in Ohio
« on: April 16, 2013, 05:06:03 pm »
I'm driving 7 hours to this race. Better see tons of PA and east coast guys there.

41
Coffee Shop / Re: Mower Racing at TMS
« on: April 16, 2013, 02:39:08 pm »
It can if the driver isn't any good...

42
Non-Affiliated Races / Re: 2013 ALL AMERICAN MOWER CHAMPIONSHIPS
« on: April 16, 2013, 09:35:54 am »
From what I can see, you would most likely be in sp or Cp. BUT!!!!! You have to have a billet flywheel. You would have to talk to a tech person and see.

43
Non-Affiliated Races / Re: Monster mow down in Ohio
« on: April 15, 2013, 12:39:17 pm »
Already pumped for this race/pull. Now only if we could set the classes so I can pull and race both!

44
Coffee Shop / Re: Real racing wheels.
« on: April 12, 2013, 01:23:33 pm »
My wheels from OMF for both, custom made after I placed order and shipped to me in two weeks from CALI was $275. This is the third set of wheels I have gotten from them, and I won't use anyone else. I've heard of a person who had an issue and they fixed it free of charge and paid for shipping. Quality work.

45
Post your Pics! / Re: 2013 Midwest Super Cub FXS (CUBZILLA)
« on: April 11, 2013, 12:20:54 pm »
8x8, 4/110. Front is a 6x7.75. Dwt wheels and omf did all the work.

Pages: 1 2 [3] 4 5 ... 57
anything