1
Briggs OHV & Vanguard / running a single on its side
« on: March 26, 2015, 04:11:08 am »
does anyone know if it is possible to run a ohv single on its side with the head pointing in the upward direction
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Driveline / gear ratio info
« on: August 07, 2014, 03:23:20 am »
I purchased a tractor that was a sportsman.....now I want to turn it into a arma class super stock...stock motor with governer....it has a 39 tooth rear sprocket..and I eed it to be 8 to 1 ratio every 8 turns of the motor I need 1 turn of the rear..anyone know a good formula...or what front tooth do I need to get 8to1..thanks for the help
3
Coffee Shop / carb question
« on: March 13, 2014, 01:08:01 am »
What series tillotson bolts up to a briggs ohv....and does anyone know the distance from center to center of the mounting bolt hole and the size of the intake on the head???...thank you
4
Coffee Shop / super mod build rules
« on: March 05, 2014, 07:42:04 pm »
I am looking to build a super mod single...what should I offset the front and rear axles...what is max width and wheel base...any help..thank you
5
Coffee Shop / super mod build rules
« on: January 29, 2014, 09:24:56 pm »
Does anyone know if I can make a custom frame or use a mower frame??
6
Coffee Shop / tillotson carbs
« on: January 02, 2014, 11:32:47 pm »
I am going to try a Tillotson HD carb....but I need to find a HD..to an HR 45 degree intake manifold...anyone know where I can look..thanks for all the help this year
7
Coffee Shop / how much to take off head
« on: December 18, 2013, 02:31:33 am »
I am running a 31.non avs ohv...I am getting head work done..how much should I get teken off..when decking the head..thanks
8
Coffee Shop / pulley ratio
« on: December 16, 2013, 01:52:16 am »
I am running a prox class ...with arma...I am currently running a 5" pulley on the motor & a 5" pulley on my rhgb..should I change it any info will help thanks
9
Briggs OHV & Vanguard / single ohv keyway question
« on: September 05, 2013, 11:36:19 pm »
Does anyone know the exact dimensions of the key for a ohv briggs..31ci..thank you
10
Coffee Shop / air pressure
« on: August 16, 2013, 03:11:22 am »
I am new to racing and need advice on air pressure....I am running a pro x..we run on really packed
Clay no banks what pressure should I run in my tires .
Clay no banks what pressure should I run in my tires .
11
Coffee Shop / pulley question
« on: June 05, 2013, 01:25:28 am »
I am running a pro x with a single throw clutch....and RHGB my pulleys are the same size
Should I switch this up or won't I gain anything.....thank you
Should I switch this up or won't I gain anything.....thank you
12
Briggs OHV & Vanguard / specs on pistons
« on: June 04, 2013, 12:29:10 am »
I am looking on line for a place to order pistons...I have a 33 ohv single and don't know thwe part # for ordering one..thank you
13
Briggs OHV & Vanguard / who does the best cams and cranks
« on: June 03, 2013, 03:16:20 am »
I am looking for any info on who does cams and cranks with decent turn around time....I have a 31''on avs bored to a 33...thanks for the help
14
Tecumseh Engines / i need a coil
« on: April 18, 2013, 10:00:53 pm »
I am looking for a coil for my tech v twin...I believe its a 40 or 41 can anyone help?
15
Coffee Shop / looking for a piston
« on: April 18, 2013, 03:17:22 am »
Hi I am looking for a good price on 33 ci...pistons for a briggs non avs single..
Please help
Please help
Pages: [1] 2