Heymow - Lawnmower Racing Forum

General => Post Your Pictures/Video => Post your Pics! => Topic started by: Nkaratzas89 on April 08, 2015, 07:34:06 pm

Title: Racing Mower Before Paint!
Post by: Nkaratzas89 on April 08, 2015, 07:34:06 pm

Here's my ARMA legal MTD build, just before it goes into paint. This is w/o the hood, seat, and fenders. What do you guys think?

(http://i300.photobucket.com/albums/nn7/LN-Mowersports/photo%201_zps6jbirbct.jpg)

Title: Re: Racing Mower Before Paint!
Post by: redline on April 08, 2015, 08:24:51 pm

I thought the steering shaft had to exit the dash at the factory angle/location? Yours is where the gas tank was.

Title: Re: Racing Mower Before Paint!
Post by: Nkaratzas89 on April 08, 2015, 08:26:53 pm

Quote from: redline on April 08, 2015, 08:24:51 pm

I thought the steering shaft had to exit the dash at the factory angle/location? Yours is where the gas tank was.

For ARMA I think its just behind the motor and centered in the frame.. ill check that though

Title: Re: Racing Mower Before Paint!
Post by: PJG56 on April 08, 2015, 11:29:04 pm

Pretty sure ARMA rules say has to be in original hole in dash, vertical angle can change, but must be in original dash location.

Title: Re: Racing Mower Before Paint!
Post by: Huffy044 on April 09, 2015, 11:05:23 am

Does not have to exit through the original hole for ARMA.

Title: Re: Racing Mower Before Paint!
Post by: Nkaratzas89 on April 09, 2015, 05:58:42 pm

Quote from: Huffy044 on April 09, 2015, 11:05:23 am

Does not have to exit through the original hole for ARMA.

Okay, Thanks! Lots of releif! I was going to say.. a lot of people fab up their own dashes.