Heymow - Lawnmower Racing Forum

Engine Help => Kohler Engines => Topic started by: bountyhunter on January 04, 2011, 02:03:21 pm

Title: 20hp v twin
Post by: bountyhunter on January 04, 2011, 02:03:21 pm
Hey what the differances in rotating assembly(crank,Rods pistons ect...) between a horazonal and vertical engines!!
OK did they make a courage Horizonal courage kohler or were they all commands and isn,t the Commands a better engine thanks
Title: Re: 20hp v twin
Post by: GRUBDIGGER on January 04, 2011, 04:00:57 pm
COMMANDS ARE TOP OF THE LINE. COURAGE IS VERTICAL AND HOMEOWENER.
COMMAND IS YOUR BEST BET.
Title: Re: 20hp v twin
Post by: Caseracer on January 04, 2011, 05:47:57 pm
On the Command, the internals are all the same and interchangable.  The Block, pan and oil pump pick-up are different.  The only difference in the heads are the placement of the oil drain back hole.  The heads can be drilled for the opposite version.

Jack Jones
Hard Case Racing
Title: Re: 20hp v twin
Post by: bountyhunter on January 05, 2011, 08:24:19 am
OK
thanks im picking up a rider with a horizl. shaft kohler so it shouls be a command than!
Title: Re: 20hp v twin
Post by: landlord on January 28, 2011, 08:19:46 pm
it might be a magnum, those are not very good and you should send it to me