Heymow - Lawnmower Racing Forum
Mower Building / Setup Help => Garden Tractor Pulling => Topic started by: KeithB078 on October 27, 2009, 09:11:18 pm
-
Got the frame cleaned up , primed and painted
This tractor will be from at least 3 different tractors.
The frame and tin work is a C-160 eight speed, the trans is 8 speed 8 pinion from a C-81, the motor is a 12 HP Kohler from a C-120 Auto.
The C-160 tranny has to be taken apart and get new seals at some time, it will be a spare or go in another tractor.
Maybe i should name it Frankenstein biggrin.gif
This one will be a stock 12HP class
(http://keithb.frobozz.us/C120p2.jpg)
(http://keithb.frobozz.us/C120p3.jpg)
(http://keithb.frobozz.us/C120p4.jpg)
some more progress
(http://keithb.frobozz.us/C120p6.jpg)
(http://keithb.frobozz.us/C120p7.jpg)
(http://keithb.frobozz.us/C120p9.jpg)
running , replaced the fuel line with new, took it out and drove it around
Still have to build wheelie bars and mid and front weight brackets, and more tin work
(http://keithb.frobozz.us/C120p10.jpg)
(http://keithb.frobozz.us/C120p11.jpg)
(http://keithb.frobozz.us/C120p12.jpg)
-
looks beastly :omg:
-
Nice Tractor:
-
My 5 year old son has a tractor just like that one that he rides around in the yard nice tractor 8)
-
Thanks guys, still got some more painting. also plan to do some motor work, like a 18 HP OHV cam and shave the head
-
Keith is that a hitch off ebay. If so how is its fitment. I am building a stock wheel horse for my son over the winter but with JD sheet metal. It will look like a 4020 from the early 70's when done. Our class is stock wheel base for chassis being used and stock engine on the governor at 4000 rpm.
-
it is off Ebay. it fits very well. Was like $33.00. i plan to weld 4 tabs to it to bolt alum wheelies bars to
-
What hp is the motor?
-
This one will be a stock 12HP class
-
"Will Be" or "Was" I would hope this 2 year old build is done by now!
-
Hard tellin, last time he was online was mid April!!