31
Chassis / Re: step thru
« on: December 30, 2011, 08:04:17 pm »
yes sir thats it what kind of frame is it and do you have any build threads thanks alot for the reply
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
any of you guys ever use the frames with the big square hole for the muffler the only name on the rear of the mower is octane there was not a hood on it when i got it but it has a 25 hp briggs v twin i searched the build threads but didnt see any any info is appreciated
33
Non-Affiliated Races / Re: Oct 22 Race in Anderson SC
« on: October 11, 2011, 05:13:41 pm »
Come on guys is any one near sc thats wants to race we will race stock lawnmowers to, the blades must be removed and no more than 3600 rpm
34
Non-Affiliated Races / Re: Oct 22 Race in Anderson SC
« on: October 10, 2011, 12:21:45 pm »
i will ask the owner and see it has been one of the top kart tracks around here for a good while
http://www.24raceway.com/ heres the link to the track its wka
http://www.24raceway.com/ heres the link to the track its wka
35
Non-Affiliated Races / Oct 22 Race in Anderson SC
« on: October 10, 2011, 10:08:17 am »
A friend of mine owns a go kart track in anderson SC he wants to have a lawnmower race anyone interested pm me and let me know i will try and find out more details (safety is a must )
36
Briggs Flathead / Re: piston
« on: September 15, 2011, 07:29:42 pm »
the pin size is .670 and the compression height is 1.415 thanks for any help
37
Briggs Flathead / Re: piston
« on: September 15, 2011, 10:35:24 am »
no sir i dont but i will mic it when i get home thanks for the reply i will post it later today
38
Briggs Flathead / piston
« on: September 14, 2011, 04:32:30 pm »
Trying to find a part number for a stock briggs piston that will fit my my 190707 8 hp it has a steel sleeve and the bore is 3.100 and i am using the stock rod thanks in advance for any help
39
Coffee Shop / Re: WHY WHY WHY!!!!
« on: July 31, 2011, 09:46:26 pm »
all you guys have been a really big help to me raced my first race at a race car track last saturday and i won it was the most fun i had in a long time thanks to all of you maybe one day i can do somthing to help also B Chitwood
40
Briggs Flathead / Re: coil hitting arc flywheel gear
« on: July 19, 2011, 04:12:27 pm »
yers sir i did do i need to get a spacer thanks
41
Briggs Flathead / Re: coil hitting arc flywheel gear
« on: July 16, 2011, 03:27:23 pm »
thanks for your help sir
42
Briggs Flathead / Re: coil hitting arc flywheel gear
« on: July 16, 2011, 03:13:01 pm »
what should i torque it on i shouldnt have to shim the coil should i what do you think i need to do thanks
43
Briggs Flathead / Re: coil hitting arc flywheel gear
« on: July 16, 2011, 03:06:56 pm »
yes sir the ground wire is on the bottom side i didnt tighten the flywheel yet i just snuged it with a rachet thands
44
Briggs Flathead / Re: coil hitting arc flywheel gear
« on: July 16, 2011, 02:58:40 pm »
not sure of the part number coil came off of a race motor i had thanks
45
Briggs Flathead / coil hitting arc flywheel gear
« on: July 16, 2011, 02:38:58 pm »
anyone ever had the 5 hp coil hit the ring gear on a arc flywheel on a model 19 i seated the flywheel and used the arc coil bracket and when i tighten the coil it hits the ring gear please tell me what i am doing wrong thanks in advance