Author Topic: Right Angle Gear Boxes? (Read 28359 times)

creechfan · « **Reply #60 on:** July 31, 2006, 02:06:03 pm »

OK, thatâ€™s what Iâ€™ve been estimating while doing the research.
Do you remember what your gear box was rated for? How close do I have to follow the specification?

Thanks for your help Mr.Herrin!!!!!!!!!!!!

-CreechFan

matt25001149 · « **Reply #61 on:** July 31, 2006, 02:14:50 pm »

those gear boxes are rated for 10 hp and a static tourque of 1,200 inch pounds thats around 100 foot pound sso theyll take a pretty good beating and they are hard to break i have never heard of anyone busting one in our league the only thing u gotta watch is they like to twistif they arent mounted firmly id say go for it theyre just as fast if not faster thena 700 if u gear it right

George Herrin · « **Reply #62 on:** July 31, 2006, 05:45:37 pm »

Creech I know I am old and fat and gray hair is abundant, and I admire your espect, but PLEASE just call me George. I ain't ready to be that old yet!!!!

LTL101 · « **Reply #63 on:** July 31, 2006, 10:31:31 pm »

Ok George.....so if I am reading this right I need

Steel Bevel Gear 778154

Steel Input Gear 778153

4~ input oil seals 788083.......(4 because noone in Ks Has any)

and On the outside 15 tooth Sprocket 786111

This Lawnmower building is fun.....but you can almost read a newspaper through my Credit card it is getting so thin

George Herrin · « **Reply #64 on:** July 31, 2006, 11:33:14 pm »

Now you getting the idea.

LTL101 · « **Reply #65 on:** July 31, 2006, 11:34:56 pm »

so I got the right parts then.......the poor UPS guy is ready to kill me

LTL101 · « **Reply #66 on:** August 01, 2006, 08:48:48 pm »

are you guys buying all the good parts??????......no place around here has the oil seals....and seems the gears are unreachable also....anybody have any good sources???

George Herrin · « **Reply #67 on:** August 01, 2006, 09:51:49 pm »

These are not high volume items most mower shops will have to order them. generally a two week wait. And they must be a tecumseh dealer.

creechfan · « **Reply #68 on:** August 02, 2006, 07:27:11 am »

OK George, I can do thatâ€¦
Itâ€™s how Iâ€™ve been raised, and I know you are older than meâ€¦.
But if you insistâ€¦..

matt25001149, Iâ€™m not sure what gear boxes your referring too, 700â€™s? right angle?, but in my research Iâ€™ve found several different types (right angle) that were rated for many different horse power numbers, torque and RPM.

If you were talking about a specific one and I completely over looked it in this post, Iâ€™m sorryâ€¦. LOLâ€¦

-CreechFan

allntexas · « **Reply #69 on:** August 02, 2006, 11:46:29 am »

Try this place for your seals and gears. http://www3.sears.com/ They can usually ship to you in less than a week.

matt25001149 · « **Reply #70 on:** August 02, 2006, 06:09:46 pm »

i was speaking of the peerless R.A.D pictured in this thread somewhere (green one)

LTL101 · « **Reply #71 on:** August 02, 2006, 10:27:53 pm »

Thanks for the sears link....they have everything in stock except the Sprocket.......for $98.08........wheeeeeew......

News:

Author Topic: Right Angle Gear Boxes? (Read 28359 times)