Topic: carb mods for intex

[bountyhunter]

 Does any one sell adjustable main kits(Carb) for 44 cu Intex twin

[larry crouch]

you will be lucky if you get that info from here, it took a lot of work and a carb or two
 to figure it all out. Good carbs, i think faster than vanny but who knows?

[bountyhunter]

 Will vanguard carbs work on intex if so did they make any with adjustable mains?

[George Herrin]

If its an older intek then you can use the walbro needle jet, it will not bottom out but will work. I however modify the nit to use a tilly needle where it bottoms out. If an newer carb, its a bit more involved meaning replacing several parts internally in order to use the needle. You can however send it to EC Ditributing and for 60.00 plus parts I can seteverything up depending on which carb. But I do not sell a kit. Sorry. Not sure on parts can't tell you that till I receive carb and see what I have to do. yes the vanny will work but there is nothing to make it adjustable.

[bountyhunter]

George is there any way to tell the older carb from newer ones. or can you go by engine ##s

[George Herrin]

pull the bowl, black platic tube older carb, white tube newer carb