Author Topic: Disc Brake  (Read 4241 times)

0 Members and 1 Guest are viewing this topic.

Offline s.jenkins

  • Turf Warrior
  • **
  • Posts: 115
  • Karma: 0
    • View Profile
Disc Brake
« on: October 06, 2020, 05:41:53 pm »
Peerless 800 series transmission. Where do you put the brake rotor. There isn't enough room on the axle between the tire rim and the transmission case.
Thank You
Skip Jenkins

Offline cycloneracer

  • Easy Parcheesy!!!!!!!
  • Global Moderator
  • Highly Mowtivated
  • *****
  • Posts: 4117
  • Karma: 37
  • Gender: Male
  • Easy Parcheesy!!!!!!!
    • View Profile
Re: Disc Brake
« Reply #1 on: October 06, 2020, 11:16:20 pm »
You need a brake hat to offset the rotor over axle housing. 

You may have to have one custom made.   I?m not sure if anyone is producing them anymore. 

Paul Krueger

****2017 USLMRA FXT points Champion****

#150 Worlds First "sidewinder" FX (now dismantled)

#150 FXT  Sponsored by Zach Kerber Machine. http://zkbrmachine.com/

Easy Parcheesy Racing

Offline RoMow

  • Newbie
  • *
  • Posts: 59
  • Karma: 13
  • Gender: Male
    • View Profile
Re: Disc Brake
« Reply #2 on: October 07, 2020, 12:31:52 pm »
Skip, 

   Can you send a picture of the back side of the hubs/rims you're using on your 800 transaxle, as well as a picture of the rotor hubs?  You may not need the hats. 

Respectfully, 
Rodney Rom 
Rom's Reworks 
Butler, MO 
"No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation." (Age 73)

Offline s.jenkins

  • Turf Warrior
  • **
  • Posts: 115
  • Karma: 0
    • View Profile
Re: Disc Brake
« Reply #3 on: October 07, 2020, 03:14:46 pm »
Not able to send pic at this time and may be approaching this project with the wrong equipment. The transaxle I have isn't the one that came with the mower, but the bolt pattern is the same. Murry chasis . As I mentioned it is a peerless 800 series and I have locked the axles.
The  intent is a drag mower. Rims are 7" tall by 6" regular mower rims. There is only 1/2 inch of axle exposed between inner hub and transaxle housing. The original rotor is only 3" tall with a splined shaft. My other two mowers are built to A/P specs, so I don,t have any transaxle experience. I am not familiar with what "hood" means.
I really appreciate your trying to help.
Skip Jenkins

Offline s.jenkins

  • Turf Warrior
  • **
  • Posts: 115
  • Karma: 0
    • View Profile
Re: Disc Brake
« Reply #4 on: October 07, 2020, 04:12:43 pm »
Sorry, ment to say don,t know what "hat" means or where it would be located.
Thanks

Offline cycloneracer

  • Easy Parcheesy!!!!!!!
  • Global Moderator
  • Highly Mowtivated
  • *****
  • Posts: 4117
  • Karma: 37
  • Gender: Male
  • Easy Parcheesy!!!!!!!
    • View Profile
Re: Disc Brake
« Reply #5 on: October 08, 2020, 12:35:00 am »
http://www.heymow.com/index.php/topic,24099.msg242892.html#msg242892

Check this out.   This is what is called a “hat”. 

Unfortunately you need to move things around to get more than a 1/2” of clearance.  You need sone sort of hub to fit between the axle housing and the wheel hub. 
Paul Krueger

****2017 USLMRA FXT points Champion****

#150 Worlds First "sidewinder" FX (now dismantled)

#150 FXT  Sponsored by Zach Kerber Machine. http://zkbrmachine.com/

Easy Parcheesy Racing

Offline s.jenkins

  • Turf Warrior
  • **
  • Posts: 115
  • Karma: 0
    • View Profile
Re: Disc Brake
« Reply #6 on: October 08, 2020, 08:36:19 am »
Now I got it.  Thanks

Offline RoMow

  • Newbie
  • *
  • Posts: 59
  • Karma: 13
  • Gender: Male
    • View Profile
Re: Disc Brake
« Reply #7 on: October 22, 2020, 04:34:53 pm »
Not able to send pic at this time and may be approaching this project with the wrong equipment. The transaxle I have isn't the one that came with the mower, but the bolt pattern is the same. Murray chassis . As I mentioned, it is a Peerless 800 series and I have locked the axles.
The  intent is a drag mower.
 

Skip, 

   If you want to have a successful drag mower, your 800 transaxle would be considered "the wrong equipment."  You need an 820 transaxle -- all heat-treated cut steel gears; all needle and ball bearings on the internal shafts (no bushings); 1"-diameter axles; high-speed final-drive gearsets available so you don't have to over-rev your input shaft; and the 820 has the same mounting as the original transaxle in your Murray and your current 800, for a "bolt-in" installation. 

   Is your shifter between your legs or on the right fender? 

Respectfully, 
Rodney 
"No matter how many material possessions or awards you may acquire in your lifetime, the only thing you will ever truly own is your reputation." (Age 73)