Author Topic: 35 ci oversize pistons ??  (Read 4073 times)

0 Members and 1 Guest are viewing this topic.

Offline refteck

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
35 ci oversize pistons ??
« on: June 26, 2019, 02:47:28 pm »
Looking for some 20 hp Vanguard 35ci oversize pistons for the ARC long rods.  I have spoke to ARC, PVT and carrier performance with no luck. 
Currently have cut down .020 and scrapped a cyl and need to go bigger, what is everybody using or doing??? New block? New sleeve?  We have 10 motors that are identical, so going the 38ci piston route won't happen.

Thanks

Offline refteck

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: 35 ci oversize pistons ??
« Reply #1 on: June 28, 2019, 01:25:29 pm »
So......38 views and no opinions???

Offline PJG56

  • Turf Warrior
  • **
  • Posts: 580
  • Karma: 4
  • Gender: Male
    • View Profile
Re: 35 ci oversize pistons ??
« Reply #2 on: June 29, 2019, 07:54:11 am »
Send one of your current pistons and wrist pins to JE and have them copy it .
Also tell them the bore size you want.
Paul Guptill  (oppy) #238modX
2012 slmra mowstock champion(builder/owner)

2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)

Offline refteck

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: 35 ci oversize pistons ??
« Reply #3 on: June 30, 2019, 11:10:54 pm »
Thanks.

Will they make 2 or is there a minimum order?   Most I have looked into want at least 100.  I will ask.

Have you heard of guys putting in a new sleeve?

Offline PJG56

  • Turf Warrior
  • **
  • Posts: 580
  • Karma: 4
  • Gender: Male
    • View Profile
Re: 35 ci oversize pistons ??
« Reply #4 on: July 01, 2019, 04:04:49 pm »
Minimum order is usually 4 pistons from JE,and yes you can sleeve them too.
Paul Guptill  (oppy) #238modX
2012 slmra mowstock champion(builder/owner)

2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)

Offline refteck

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: 35 ci oversize pistons ??
« Reply #5 on: July 01, 2019, 08:06:44 pm »
Thank you

 

anything