Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Want to Join This Forum? Click Here!
Home
Help
Search
Calendar
Login
Register
Heymow - Lawnmower Racing Forum
»
Engine Help
»
Briggs Flathead
»
Topic:
Briggs model 28 piston
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Briggs model 28 piston (Read 5711 times)
0 Members and 1 Guest are viewing this topic.
Leon_Johansson_
Newbie
Posts: 14
Karma: 0
Briggs model 28 piston
«
on:
October 30, 2018, 09:06:00 am »
I just started building a briggs model 28 i/c flathead with the arc dog bone and connecting rod but i just noticed that the cylinder bore is 3.3 inches (83.7)mm wide when it’s supposed to be 3.4 inches (87.7) mm. So i was wondering what piston should i get? One that is short enough for the arc rod and just 3.3in wide. Maybe the briggs model 49 piston?
Any help is appreciated.
Logged
PJG56
Turf Warrior
Posts: 580
Karma: 4
Gender:
Re: Briggs model 28 piston
«
Reply #1 on:
October 30, 2018, 09:40:12 am »
Standard bore on model 28 flathead or ohv is 3.4375",
the only 2 briggs engines that use 3.300" bore is 21 ohv horizontal and 49 intek twin
Logged
Paul Guptill (oppy) #238modX
2012 slmra mowstock champion(builder/owner)
2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)
Leon_Johansson_
Newbie
Posts: 14
Karma: 0
Re: Briggs model 28 piston
«
Reply #2 on:
October 30, 2018, 10:44:52 am »
Thanks, Do you have a link to the model 21 ohv horizontal piston?
Logged
PJG56
Turf Warrior
Posts: 580
Karma: 4
Gender:
Re: Briggs model 28 piston
«
Reply #3 on:
October 30, 2018, 11:10:19 am »
Did you buy an ARC rod??If you did what did you buy 6280 or6281,they are both designed to use the model 28 and 31 AVS piston ,you should do some better measuring of bore,i think you are mistaken!
Logged
Paul Guptill (oppy) #238modX
2012 slmra mowstock champion(builder/owner)
2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)
Leon_Johansson_
Newbie
Posts: 14
Karma: 0
Re: Briggs model 28 piston
«
Reply #4 on:
October 30, 2018, 12:39:38 pm »
Well i bought the 6280 rod and i have measured both the piston and the bore with a caliper and all.
But it always comes out as 83.7mm and thats quite a bit of difference from the 87.7 that it’s supposed to be. Maybe i should get the model 21 piston and try.
Logged
PJG56
Turf Warrior
Posts: 580
Karma: 4
Gender:
Re: Briggs model 28 piston
«
Reply #5 on:
October 30, 2018, 01:09:15 pm »
Might want to try some different measuring tools,Like an inside mic
Logged
Paul Guptill (oppy) #238modX
2012 slmra mowstock champion(builder/owner)
2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)
PJG56
Turf Warrior
Posts: 580
Karma: 4
Gender:
Re: Briggs model 28 piston
«
Reply #6 on:
October 30, 2018, 03:53:30 pm »
You will need the Biggs 792307 piston and 697099 wrist pin.
Good Luck
Logged
Paul Guptill (oppy) #238modX
2012 slmra mowstock champion(builder/owner)
2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)
PJG56
Turf Warrior
Posts: 580
Karma: 4
Gender:
Re: Briggs model 28 piston
«
Reply #7 on:
October 30, 2018, 03:56:14 pm »
I also have a few nice used performance cams for your motor!!
Logged
Paul Guptill (oppy) #238modX
2012 slmra mowstock champion(builder/owner)
2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)
Leon_Johansson_
Newbie
Posts: 14
Karma: 0
Re: Briggs model 28 piston
«
Reply #8 on:
October 30, 2018, 08:38:32 pm »
Thanks for everything and if you’d ship to a different country i would be happy to pay you through paypal.
Logged
PJG56
Turf Warrior
Posts: 580
Karma: 4
Gender:
Re: Briggs model 28 piston
«
Reply #9 on:
October 30, 2018, 09:30:52 pm »
Where are you located
Logged
Paul Guptill (oppy) #238modX
2012 slmra mowstock champion(builder/owner)
2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)
Leon_Johansson_
Newbie
Posts: 14
Karma: 0
Re: Briggs model 28 piston
«
Reply #10 on:
October 31, 2018, 04:49:13 am »
Sweden
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Heymow - Lawnmower Racing Forum
»
Engine Help
»
Briggs Flathead
»
Topic:
Briggs model 28 piston
anything