Author Topic: 28ci briggs crankshaft question  (Read 302 times)

0 Members and 1 Guest are viewing this topic.

Offline Jjansen

  • Newbie
  • *
  • Posts: 19
  • Karma: 0
  • Gender: Male
    • View Profile
28ci briggs crankshaft question
« on: January 24, 2018, 09:54:37 PM »
looking to build a 28ci flathead motor,  i was looking at a crank with the weights added,  would this eliminate having to have the balancer in the motor? or what are the advantages of this.
also will this motor ungoverned keep up with 20hp vtwin motors governed at 3800rpm.

thanks again



Offline PJG56

  • Turf Warrior
  • **
  • Posts: 472
  • Karma: 4
  • Gender: Male
    • View Profile
Re: 28ci briggs crankshaft question
« Reply #1 on: January 25, 2018, 08:56:29 PM »
Yes a crank with weights on it would eliminate the balancer in the motor.
Once off the governer you should have a billet flywheel ,for safety reasons alone.
With some port work ,carb work and a good cam you should be able to run with 20go governed motors
Paul Guptill  (oppy) #238modX
2012 slmra mowstock champion(builder/owner)

2013 slmra mowdified champion(builder/owner)
2013 ARMA national champion Mod-X(builder/owner)
2014 ARMA national champion Mod-X(builder/owner)
2014 All American Champion Mod-X/CP(builder/owner)
2014All American Champion FXT (engine builder)
2014 All American 2nd place SP(builder/owner)
2015 All American 2nd place BP (builder/owner)
2016 OutlawTriple Crown FXT Champion (engine builder)

 

anything